This is topic Anyone ported stock E7's?? in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=004043
Posted by 91 5.0 (Member # 1527) on
:
Has anyone ever done this? I dont have alot of money to spend, but ive got alot of time so porting the stock heads seems worthwhile. What do you guys think? I noticed on the exhaust port, there is a huge hump. Can this be ground off or is it there for a reason?
Posted by 92coupe (Member # 1957) on
:
it will probably cost about the same as gt-40p's or world heads, but if you have the time to wait around why not?
Posted by 91 5.0 (Member # 1527) on
:
Im just thinking about doing some minor porting myself. Match the heads to the intake, take that hump off, if it wont cause any problems, and just opening everything up a bit.
Posted by FasterDamnit (Member # 442) on
:
Check this out.
http://fordmuscle.com/phpBB/viewforum.php?forum=11&8
Yes, cut those bumps out at a miniumum.
Posted by Blue Oval (Member # 2548) on
:
Yes those bumps can be ground of and, i have ported a set of E7s and u can get them to flow quite well mine flow as good as GT40 Xs. they do have bigger valves in em but im sure u could do good without bigger valves cuz there pricey to have put in. Good luck
Posted by MR GO FAST (Member # 2088) on
:
I say do it. I did the same on my 89 GT and ran great. Never had the coin for the heads so I installed the GT40 valve train, removed the bumps and gasket ported them. This was back in early 90's when after market heads were more than 1200.00 bucks.
Posted by st5150 (Member # 51) on
:
http://www.cmc.net/~xero/Mousesporting.html
Posted by GR40Coupe (Member # 698) on
:
i have i was bored and i learned some at the sametime noticed a little differents after everything was done.
Posted by HungryHippo (Member # 537) on
:
if you have the time, go for it. it took me a weekend just for the porting. i bought carbide bits off ebay for 30 bucks. the 2 links above are excellent
Posted by 93lx342 (Member # 1793) on
:
i have a friend with a full weight gt and he ran 106.7 and 118 on a 100 shot with a small cam,ported stock intake and heads.the car made 260+ rwhp and 308 ft lbs n/a. and 365 rwhp and 450 ft lbs with a 100 shot.if you contact jeff s he can get the number of the guy who does the port work.i think you can get the heads and intake from him ported for like $650-700 including the price of the heads and intake
Posted by jayl (Member # 185) on
:
nice 60' in that notch!! jeff barely got ya though! lol
Posted by 93lx342 (Member # 1793) on
:
i think i could have gotten a low 1.7 or maybe a high 1.6.it really caught me off gaurd when it launched.we are gonna take it back to the dyno and see why it isnt makin the power it should.it made 435rwhp with a slippin belt at 11 lbs of boost.it should be near 15 psi and 500 rwhp.
Posted by jayl (Member # 185) on
:
yeah jeff was tellin me about the slippin belt thing......and how he was shocked how it hooked! i was suprised myself! bald drag radials !! good stuff
Fueled by Ford Mustang Owners
on CaliforniaFords.com