This is topic 3.73,3.90,or 4:10's in a fox.5spd in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=003871
Posted by street_illegal_stang (Member # 1554) on
:
i'm running bfgoodrich comp t/a zr 225/50/15
for street tires.
i need to know which is the best for me
which slicks and what size tires -(10 hole rims)
which gears? 4:10
which posi? auburn?
i drive about 50-60 miles on the freeway to the track every week
and drive to work-40 miles a week
with the street tires i have the motor will be reving at 3200 w/4:10 at 70 mph
if i go 4:10's will i need to get 255/50/15 tires?
i live 30 miles from irwidales 1/8 mile
and thats the track i spend most of my time at.
oh i have a stock 5.0 block with gt40 irons and gt40 intake. no power adder but my right foot
Posted by shade-tree (Member # 298) on
:
4.10s, although 225/50-15 is a *puny* tire. Not so much in width as it is in height. A smaller tire effectively increases the overall gearing effect.
When you step up to a 26x8.5 ET drag you will be greatly rewarded.
They'll be fine w/ your current 225/50-15's though. It's a great gearing advantage.
[ April 25, 2003, 10:08 PM: Message edited by: shade-tree ]
Posted by street_illegal_stang (Member # 1554) on
:
what posi should i buy?
and i have about $800
for gears,posi and labor
i need to know of what brands to to go with.
thanks again
Posted by shade-tree (Member # 298) on
:
rebuild your stock rear if you are getting the one wheel peel. Extra friction pads and the F-150 'S' spring wouldn't hurt either
Posted by street_illegal_stang (Member # 1554) on
:
i dont need stock rebuilds,i need somthing new
for once i actually have the money for somthing
easton?auburn?
and should i invest in 31 spline axles?
just for the future plans
306 low comp w/175shot ported gt40 irons.
Fueled by Ford Mustang Owners
on CaliforniaFords.com