T O P I C R E V I E W
|
91 5.0
Member # 1527
|
posted
Ive got a 5.0. I usually hook pretty well at the track on slicks, but on the street its a different story. What kinds of things can I buy to get the car to hook better. Also, I dont want to sacrifice too much cornering ability of the car. Thanks.
|
Fast477Mach1
Member # 2559
|
posted
lower control arms its all good....
|
st5150
Member # 51
|
posted
Nitto Drag Radials.
|
Chico Stang
Member # 801
|
posted
What about a couple of 100 lb. sand bags in the hatch area, this will not only make ur vehicle heavier, but make it so ur back tires can not spin as much.
Josh
|
Blown Mystic
Member # 476
|
posted
run et streets on the street
|
rokcrln
Member # 2536
|
posted
Lower control arms, good shocks, a torque arm set up with the correct springs.
|
91 5.0
Member # 1527
|
posted
I dont really want to run ET streets. I want to run some regular drag radials. Im looking to do it all with suspension work.
|
1990GT50
Member # 2119
|
posted
upper and lower control arms, adjustable shocks or coilovers if you want to go all out and if youre going all out you can pick up an anti-roll bar
|
91 5.0
Member # 1527
|
posted
what does a panhard bar and torque arm do?
|
Fast477Mach1
Member # 2559
|
posted
locates your rear so you dont get so much deflection
|
91 5.0
Member # 1527
|
posted
deflection of what? Are those two things the same?
|
Black94 5.0
Member # 655
|
posted
A Panhard bar stops the rear axle from moving from left to right....A torque arm controls the axle rotation...
For best bang-for-buck,I would recommend a good set of lca's and adjustable uca's, so you can adjust your pinion angle for added traction at the track...
Anything else, like buying shocks and coil-overs, will be better no matter what...
|
The Nick
Member # 2244
|
posted
Posi might help too.
|
Luke87GT
Member # 21
|
posted
Nitto DR
|
92coupe
Member # 1957
|
posted
take off the front sway bar!!!!!!!!!!!!
"its only 4 bolts" "i dont care if its only 2 bolts! its not coming off"
remember that dustin?? aww good times... [ April 15, 2003, 10:06 PM: Message edited by: 92coupe ]
|
91 5.0
Member # 1527
|
posted
lol
|