T O P I C R E V I E W
|
SlowFiveOh94
Member # 2404
|
posted
I'm going to be lowering my car either 1.5" or 2" and I want to know how necessary caster cambers are for both. I'm worried about tire wear more than anything. Help me out if possible, I'm sure a lot of you guys have lowered cars...thanks...Joe
|
Black94 5.0
Member # 655
|
posted
When you lower your car the camber becomes negative(the inside of your tires wears quicker than the outside)...You can correct that with just an alignment...It really depends on how low you go...1.5" drop should be OK, but you might be maxing out the alignment slots of the stock caster camber plates with a 2." drop...
I would recommend getting some caster camber plates anyway, especially if your gonna lower you car..I lowered my car with H&R's and with Eibach's, both with 1.5+" drop with stock caster camber plates and the car was fine....I picked up some Steeda CC plates(for free)and the car feels a lot smoother due to the added caster in the alignment...
|
PseudoCobra
Member # 1689
|
posted
Yes you will need Caster Camber Plates. They can't hurt you they can only help you. The best are Maximum Motorsports, Steeda's are pretty good but not quite as adjustable as the MM one's. I've also seen Hotchkis one's but do not really know all that much about them. I'd say get the MM one's
|
mustanggt5091
Member # 444
|
posted
Definetly get some CC plates if you can, it gives way more ajustment than stock and you can have your tires aligned properly! Doesnt matter who you go with as long as there is enough ajustment for your car!
|
cobraman_1994
Member # 467
|
posted
ever see the import guys that have there car slammed to the ground and there tires are facing like this: / \? youll probably want to avoind that
|
Quick 88LX
Member # 1950
|
posted
Get them bro. You won't be sorry
|
01_Blue
Member # 1732
|
posted
Well this post explains why my left front tire wore out quicker on the inside. Can anyone tell me just how hard installation of cc plates will be? and if it's hard how much i should expect to pay for labor. Any help would be appreciated.
|
91sleeper
Member # 779
|
posted
quote: Originally posted by 01_Blue: Well this post explains why my left front tire wore out quicker on the inside. Can anyone tell me just how hard installation of cc plates will be? and if it's hard how much i should expect to pay for labor. Any help would be appreciated.
Very simple to install yourself, after you install them go get a re-alignment and you'll be all set.
|
Bill/APEX Motorsports
Member # 636
|
posted
We carry and install the Maximum Motorsports caster/camber plates. They're the strongest ones out there (4-bolt!) and allow the finest adjustments. Caster and camber are individually adjustable, so you can really dial in a precise alignment. They also use a spherical bearing at the upper strut mount, which ensures that you keep the precise alignment during hard cornering. Other brands that use rubber or urethane upper mounts allow the top of the strut to move around under cornering, which kind of defeats the purpose of dialing in a precise alignment in the first place! I have the MM plates in stock. Drop me a line!
|
66 AC COBRA
Member # 904
|
posted
hey bill, how much do u charger for a set of those plates, might have to get me some of those, and how much do u sell eibach sportlines for a 96gt convt, thanks
|
Bill/APEX Motorsports
Member # 636
|
posted
They're $199 for black powdercoat and $249 for chrome. I don't sell Eibach springs because of poor ride and handling characteristics compared to the complete package that we sell.
|