This is topic 2003 GT WHite Face gauge Install? in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=003483
Posted by 85SVOMIKE (Member # 2345) on
:
My cousing bought some whiteface gauges for his 03 GT. Are they hard to install? Has anyone here done it before, could you maybe install it for him if he pays you. He lives in Fremont but will come to you if need be. Also how much to have them installed?
Posted by y2kgt01 (Member # 1257) on
:
i did mine on my 01 i bought the gauges that u had to remove the needles, bad choice, but the needles pry off but u gotta be really carfull. first 2 screws on top of the cluster trim u will see them they have little covers. then like 10 bolts to get the cluster out. get a small hook tool of some sort put it behinde the base of the needle and pry it off gently kinda evenly on both sides till it comes off. the most important part is to put the needles back on EXACTLY how they were or else u will have no way that i know of of fixing them. i made the mistake and my oil and water gauges are slightly off now. its a pretty easy job just be careful.
[ March 18, 2003, 12:40 PM: Message edited by: y2kgt01 ]
Posted by Exocet (Member # 2495) on
:
go check that:
http://www.mustangworld.com/ourpics/fcar/whtf1.htm
It might help ![[Smile]](smile.gif)
Fueled by Ford Mustang Owners
on CaliforniaFords.com