This is topic x pipe hits tranny mount in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=003470

---

Posted by bmxer (Member # 1222) on :
 
i have bbk x pipe and the driver side pipe is about 1mm away from the tranny mount. sometimes it will hit and rattle. is this bad for the tranny mount?

[ March 17, 2003, 04:53 PM: Message edited by: bmxer ]
 

---

Posted by rokcrln (Member # 2536) on :
 
Yes it is but only because you will go nuts and take a big F-ing hammer to it once the rattle gets to you. Have you tried to loosen all bolts from the header to x pipe and to mufflers then put something between the x pipe and tranny mount. Then tighten everything back up and remove the spacer between the trany mount. This should shift things over just enough to help. Good luck.

[ March 17, 2003, 06:58 PM: Message edited by: rokcrln ]
 

---

Fueled by Ford Mustang Owners
on CaliforniaFords.com