|
Author
|
Topic: x pipe hits tranny mount
|
bmxer
¯
Member # 1222
|
posted
 
 
i have bbk x pipe and the driver side pipe is about 1mm away from the tranny mount. sometimes it will hit and rattle. is this bad for the tranny mount?
[ March 17, 2003, 04:53 PM: Message edited by: bmxer ]
Posts: 212 | From: cerritos, ca | Registered: Apr 2002
| :
|
|
rokcrln
¯
Member # 2536
|
posted
Yes it is but only because you will go nuts and take a big F-ing hammer to it once the rattle gets to you. Have you tried to loosen all bolts from the header to x pipe and to mufflers then put something between the x pipe and tranny mount. Then tighten everything back up and remove the spacer between the trany mount. This should shift things over just enough to help. Good luck.
[ March 17, 2003, 06:58 PM: Message edited by: rokcrln ]
--------------------
71 Bronco stock (for now) w/59k miles.
73 Bronco EFI 351W
71 Chevy PU w/Vett LT1
Posts: 448 | From: Winters Ca. | Registered: Mar 2003
| :
|
|
|
Email this post to someone!
Printer friendly view of this Ford topic
