This is topic wet kit question? in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=003210
Posted by TOPnotch (Member # 1340) on :
 
Anyone have any suggestions on a wet kit for a fox 5.0 Like a 100-200. I have heard good things about NX. Also with wet kits you have to run a plate Right? Does anyone make a plate for the Holley intake?
 
Posted by 1990GT50 (Member # 2119) on :
 
hey i dont know the answer to any of your other questions but i have heard NX is best because their jets are to the rear wheels and not the flywheel.
 
Posted by customN2O (Member # 914) on :
 
NX is the best, and they do make a plate for your intake, but they also make a single nozzle that works just as well. Give me a call and I can explain the differences between the two, and make you a good deal on a kit.
925-998-1517
 
Posted by 87mustang (Member # 2496) on :
 
i have a comp-u-car set up and it was vary easy install and it works grate(it go's from any where from 50hp-200hp) it works grate and i recomend it!
 
Posted by 93mustangt (Member # 680) on :
 
I run an NOS kit and its the fogger right before the throttle body.I havent had any puddeling problems.Im running a 125 shot and i squeeze in first. [burnout]
 
Posted by TOPnotch (Member # 1340) on :
 
Custom N2o I will give you a call. Thanks for info everyone [patriot]
 
Posted by SIR Paint Job w/ '84 TercelOnYoMama (Member # 1708) on :
 
Scott, how much are the NX two stage kits with the spray bars going down the middle of the spacer that fits between the upper and lower manifold for a TFS R intake?

wouldnt that kit be better than jsut a nossle infront of the tb? i figure the plate would distribute more evenly and also work better because it is closer to the valves. Am I wrong?
 
Posted by customN2O (Member # 914) on :
 
Im not allowed to discuss any kind of prices on the internet. I can tell you that I can sell at the same price as Jegs. Call me and we can discuss that spray bar, and its pros and cons to the nozzle.
925-998-1517
 
Posted by jayl (Member # 185) on :
 
you have good deals on warmers and purge kits too?
 
Posted by customN2O (Member # 914) on :
 
You know I do. but you have to give me a call.
 
Posted by Chris M. (Member # 1708) on :
 
not even over a PM?
 
Posted by customN2O (Member # 914) on :
 
hit me up on AIM. My screename is Zimsport
Its on all the time. If I dont answer, I might not be in room. I will answer if I see it
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com