This is topic Weather Stripping in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=003099

---

Posted by 91sleeper (Member # 779) on :
 
Got some new weather stripping for my front two dorrs and have never doen it before. Any pointers and/or directions to follow. I did a search and didn't find much. I got the strippings from 50 resto.

Thanks
 

---

Posted by GR40coupe (Member # 698) on :
 
Remember how it pulls out then, put the new the same way the old pulls out it can't be to hard to do i take it it's the stiping by the window correct.

[ February 12, 2003, 10:50 PM: Message edited by: GR40coupe ]
 

---

Posted by 91sleeper (Member # 779) on :
 
Its the stripping thats on the inside of the doors.
 

---

Posted by 91sleeper (Member # 779) on :
 
I guess nobody has done this before It's not as easy as it sounds.
 

---

Posted by 87 Saleen (Member # 1549) on :
 
how hard can it be?
 

---

Posted by 91sleeper (Member # 779) on :
 
If you havent done it dont respond
 

---

Posted by Norcalbmxer (Member # 235) on :
 
I have done it, and if you cant figure it out on your own, there is only 2 posibilities

#1. You got the wrong stuff. Did you check to see if its the same as the old stuff? or did you just rip your old stuff out and throw it away

#2 You are to incompetent to work on your car and no-one would be able to walk you through installing it anyway
 

---

Posted by 91sleeper (Member # 779) on :
 
I didnt say I couldnt install it I said can anyone give me any tips and/or pointers I think I am far than compitent enough to do this.
 

---

Posted by 89_FakeSnake (Member # 1253) on :
 
It's so easy it's not even funny. However, you will have to get the rear interior panels unscrewed and moved, then the headliner trim around the edge of the door out of the way. Oh, the kick panel must also be removed along with the door sill plate. Seriously, it took me 2 minutes to get it in place once those items were out of the way. Good luck dude.


 

---

Posted by 91sleeper (Member # 779) on :
 

quote:

---

Originally posted by 89_FakeSnake:
It's so easy it's not even funny. However, you will have to get the rear interior panels unscrewed and moved, then the headliner trim around the edge of the door out of the way. Oh, the kick panel must also be removed along with the door sill plate. Seriously, it took me 2 minutes to get it in place once those items were out of the way. Good luck dude.

---