|
Author
|
Topic: Prob with DMP speed cal
|
DementedGT
¯
Member # 1463
|
posted
 
 
so i followed these instructions
http://www.dallasmustang.com/speedcal_instructions.htm
and the speedcal didnt work.. instead my milage looks lik "-------" and i get a beautiful cel light, and a car that shuts off while braking going down hill... I double checked the installation and everything was wired as the instructions said... did i get a bad unit?
Posts: 275 | From: SF Bay Area, CA | Registered: Jun 2002
| :
|
|
SrK
¯
Member # 2256
|
posted
I guess you will have to switch it back to normal setup to know if there is something wrong with the speedcal. I just put mine in last weekend w/o problems.
This is not much help but....
Good luck
Posts: 23 | From: San Jose,CA | Registered: Dec 2002
| :
|
|
yesIdid
¯
Member # 58
|
posted
double-check your VSS connector ![[patriot]](graemlins/patriot.gif) .
--------------------
SOLD :(
Black 99 GT w/the 35th Anniversary package
BOUGHT :)
2015 Mustang GT premium w/PP
Posts: 514 | From: San Franpsycho | Registered: Oct 2000
| :
|
|
yesIdid
¯
Member # 58
|
posted
BTW...
Did you disconnect your negative terminal for 30 seconds?
Posts: 514 | From: San Franpsycho | Registered: Oct 2000
| :
|
|
DementedGT
¯
Member # 1463
|
posted
quote:
Originally posted by yesIdid:
double-check your VSS connector .
I double checked all the wires the second time i jacked it up.. the VSS was connected, and the wires where the way the instructions shows...
quote:
Originally posted by yesIdid:
BTW...
Did you disconnect your negative terminal for 30 seconds?
Yes. when i double checked the wires i disconnected the battery, it was disconnected for a good 5-10min.
Posts: 275 | From: SF Bay Area, CA | Registered: Jun 2002
| :
|
|
bunchmyfunky
CAFords Drag Racing Mod
Member # 360
|
posted
Make sure All your crimped connections are all the way thru the insulation. I had a problem where I was getting no MPH reading and it was a bad crimp.
Posts: 2433 | From: Vacaville | Registered: Jul 2001
| :
|
|
DementedGT
¯
Member # 1463
|
posted
quote:
Originally posted by bunchmyfunky:
Make sure All your crimped connections are all the way thru the insulation. I had a problem where I was getting no MPH reading and it was a bad crimp.
the crimp they sent was a pos, so i just spliced into the wire, and used electrical tape.
Posts: 275 | From: SF Bay Area, CA | Registered: Jun 2002
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
