T O P I C R E V I E W
|
90LX
Member # 1487
|
posted
How hard is this to do. I have seen the mustangs in the magazines and I would like to do that to mine. Has anyone tried doing this. Where do they put all of the wiring? Oh yeah I have a 90 5.0.
|
hidnn.o.s.
Member # 1219
|
posted
Never looked too difficult. Looks like it would be fun, just take a loonnngggg time. Worth it in the end.
|
TheBrain
Member # 35
|
posted
I did it to my 'vert and it not that difficult. I ran the wires into the wheelwells, moved the starter solenoid, and crap into the wheelwells also. If you look behind the shock towers, you will see a good sized hole. I left the wiring where it was coming out of the firewall, put it through the hole behind the shock tower. The main wiring harness that runs along the firewall can be relocated into the transmission tunnel. I didn't move mine because I just wanted to get my motor be in and running (did all of the wiring relocation after I blew the motor and had the engine compartment repainted)
I have some pictures around here somewhere. If I can find them , I post them here
Later Brian
|
TheBrain
Member # 35
|
posted
Now that I think about it, the reason I didn't move the loom that goes across the firewall is because I didn't know where to move it to !! Later I learned that it could be moved and attached in the transmission tunnel but I never got around to doing it
I found that pictures, I just need to get them to my host site, and linked here
Brian
|
TheBrain
Member # 35
|
posted
. [ January 23, 2003, 12:43 PM: Message edited by: TheBrain ]
|
90LX
Member # 1487
|
posted
Thanks for the info. I am curious to see the pics.
|
90LX
Member # 1487
|
posted
Did you ever get the pics up on the site?
|
TheBrain
Member # 35
|
posted
Not yet,what's your e-mail addy? I'll just send them to you
Brian
|
90LX
Member # 1487
|
posted
dunerider94@hotmail.com. thanks
|
87 Saleen
Member # 1549
|
posted
can i see them too?
huev0z@att.net
|
hidnn.o.s.
Member # 1219
|
posted
Brian, could you toss a couple pics to hidnnos@aol.com
Thanks
|
90LX
Member # 1487
|
posted
Just checkin to see if you sent the pics becuase if you did I didnt get any.
|
TheBrain
Member # 35
|
posted
I am not at home or near my computer right now. It'll be Monday before I am back in town to send them
Sorry Brian
|
Jeff S
Member # 371
|
posted
Here is a pic of my old GT:
|
90LX
Member # 1487
|
posted
JEFFS, you did the same thing and ran it all through the wheelwell? Idosent interfere with the strut?
|
Jeff S
Member # 371
|
posted
90LX,
No the wiring does not interfere with the struts. I actually did not route any of the wires into the strut tower. I used a 1" hole saw and cut two holes(one on the drivers side next to where the factory wiring harness goes into the fender behind the strut tower and the other in same same spot on the passengers side) and routed the wires inside the fenderwell above where the strut is(where the vacumn modules are).
|
Team SOLO
Member # 722
|
posted
i saw this thread and thought hmmmm...bet five bucks jeff s put in a few words on the subject...then i come in here to find pics hehehehe
|
TheBrain
Member # 35
|
posted
Let give this a try
Mustang pictures Brian [ January 27, 2003, 08:08 PM: Message edited by: TheBrain ]
|
90LX
Member # 1487
|
posted
Thanks for the pics Brian
|