T O P I C R E V I E W
|
cobraman1994
Member # 467
|
posted
im putting a carburated motor in my 86. i know i need a different fuel pump(carb specific), but what else fuel wise
|
Clark The Slut
Member # 1076
|
posted
MAKE UP YOUR MIND!!!!!!!
|
cobraman1994
Member # 467
|
posted
quote: Originally posted by Clark The Slut: MAKE UP YOUR MIND!!!!!!!
hey clark, go take a good look at a previous post i made about what im going to do. and STOP FUCKING POSTING ON MY THREADS TO SAY POINTLESS SHIT!!!!! [ January 07, 2003, 10:01 PM: Message edited by: cobraman1994 ]
|
shadow50
Member # 2265
|
posted
You're a brave soul!
Changing your 86 to a carburetor is not too hard but what about smog and the DMV? Or it this an offroad car?
It shouldn't be too hard thought, hmmm... New fuel pump, Carb, different air cleaner.. ignition different, AC was hooked to computer too. That'll take some thinking. Probably some other incidentals too.
have fun!!
Mark - 84 cfi to 92 efi conversion in progress
|
5.0#3 88'conv
Member # 1534
|
posted
you don't need to change the fuel pump just get a good regulator, and an intake manifold and your set.
|
cobraman1994
Member # 467
|
posted
the car is only being driven to the track and back. and the motor is a 408, so smog isnt really a concern (thanks jason ). and im going to run a very quiet exhaust and use electric cut outs for the track. and im keeping my stock motor thanks for the REAL replies fellas
|
SIR Paint Job w/ '84 Tercel on MTBE
Member # 1708
|
posted
if you have a 408, i'd say get rid of the stock pump. there are a billion to choose from, just pick up a summit, other than the pump all you need to finish the fuel system is a filter, a 7psi regulator and a carb.
|
Chosen1
Member # 1906
|
posted
"You will need a new fuel pump and pickup. Do NOT use the existing EFI pump. You can either use an electric low pressure pump designed for a carb (like the Holley red or blue pumps) or go with a mechanical fuel pump. In either case you must replace the fuel pickup on top of the gas tank with a purpose built pickup that does not include an in-tank pump. To use a mechanical fuel pump you must change the front timing cover on the engine to one that accepts a bolt-on fuel pump. You may also need a fuel pump eccentric to drive the pump. My '88 motor had one from the factory but I have heard of some roller motors that do not have them.".... efi to carb conversion
|