T O P I C R E V I E W
|
PeNiNsula302
Member # 1061
|
posted
Is there any way to manually get this off without taking it to a body shop? Its the pin striping (in my case, white) that runs front to back like above the door handles in that area. Someone told me with a heat gun it might come off, but i just dont know?? Any suggestions?
thnx..
**note, i just tried slightly running the edge of a razor blade along it (someone posted that worked a while back) but all that did was take off paint along with the striping . its like the shits painted on there [ January 01, 2003, 02:26 PM: Message edited by: PeNiNsula302 ]
|
j0eyabs
Member # 1026
|
posted
yeah i got a pin stripe to on my car and i just had mine repainted cause it was fadding. the person that repainted mine said i could use some rubbing compound if i ever wanted to remove it. i havent tried it though
|
gR40coupe
Member # 698
|
posted
if you take it ohh yourself it will be obvious, it will look worse than it does now so just leave it.
|
PeNiNsula302
Member # 1061
|
posted
I guess ill have a body shop do it..
|
Mustangfiv0
Member # 2231
|
posted
i took mine off, using a razor, and a screw driver, basiclly scratched up the pin stripe paint, ahen used some wd40 on a rag, and used some elbow grease, there is alittle bit of scratches, but you can tell only if your up close to the car, i think mine looks better with out it.
|
95snake
Member # 2220
|
posted
if u use a heat gun lightly on your car it will come up easy, just dont hold the gun on one spot too long or the paint will melt
|
PseudoCobra
Member # 1689
|
posted
due scott just ask Vincenzi, the guy owns a body shop, he'll tell you how to do it and possibly do it for you
|
Black94 5.0
Member # 655
|
posted
There is a special tool you can use but, all it is,is a couple of thin foam discs on a "Dremel". I used it on my '94, it worked great!!....(caution)---If your paint is faded you'll see where the original pine stripe was...You can buy the discs at any automotive paint store.
|