|
Author
|
Topic: computer threw a code saying the comp is bad
|
96Forged281
¯
Member # 2158
|
posted
 
 
Well i had been having problems with idle bouncing up and down and a misfire car would sputter on decel once it hit 2k rpms. the shop i took it to says it threw codes saying the computer is bad, if this is the case wouldnt the car not run at all??? anyone know what could cause this a bad ground or what?? IF i need to get a new computer where should i get one that is good for my application
--------------------
96 Stang GT Convertible Looks Stock =)
Posts: 277 | From: Modesto | Registered: Dec 2002
| :
|
|
Stimson
_
Member # 51
|
posted
Computers almost never go bad. They're built like rocks. Chances are you had a chip plugged in when you pulled the codes and got a check-sum error because of the chip.
Posts: 2373 | Registered: Jun 2000
| :
|
|
96Forged281
¯
Member # 2158
|
posted
so should the shop take the chip off and rescan?
--------------------
96 Stang GT Convertible Looks Stock =)
Posts: 277 | From: Modesto | Registered: Dec 2002
| :
|
|
Stimson
_
Member # 51
|
posted
No, just ignore that code and annalyze the other codes the computer spit out.
Posts: 2373 | Registered: Jun 2000
| :
|
|
96Forged281
¯
Member # 2158
|
posted
ok good deal, check your PM i sent you one thanx
--------------------
96 Stang GT Convertible Looks Stock =)
Posts: 277 | From: Modesto | Registered: Dec 2002
| :
|
|
Wildfire532FB
CAFords OG
Member # 1482
|
posted
Sawson is a pimp listen to him.
--------------------
./_ _ _ ___ __\
(]]]_ _ o _ _[[[)
|\_o_ __ __o_/|
|__|..........|__|
68 Fastback
84 CJ7
94 HMMWV
95 GT
03 F350
17 Fusion Hybrid
Posts: 17580 | From: 530 | Registered: Jun 2002
| :
|
|
96Forged281
¯
Member # 2158
|
posted
yeah so ive heard ![[Smile]](smile.gif) if he can figure out the problem im having hed rule, no one on corral or stang net has been able to diagnos my problem and no shop for that matter but then again there are no shops around here that have the brains to work on a 4.6 i know more then they do just dont have the equipment
--------------------
96 Stang GT Convertible Looks Stock =)
Posts: 277 | From: Modesto | Registered: Dec 2002
| :
|
|
Wildfire532FB
CAFords OG
Member # 1482
|
posted
did it start doing this right when your chip was installed? We had a problem wit our chip we didn't clean the contacts good enough and the car didn't idle good or drive good.
--------------------
./_ _ _ ___ __\
(]]]_ _ o _ _[[[)
|\_o_ __ __o_/|
|__|..........|__|
68 Fastback
84 CJ7
94 HMMWV
95 GT
03 F350
17 Fusion Hybrid
Posts: 17580 | From: 530 | Registered: Jun 2002
| :
|
|
96Forged281
¯
Member # 2158
|
posted
no it ran fine when i got the chip, however now you mention it i have taken off the chip a couple months ago and put it back on i left that kick panel off maybe bad connection it sure is a pain to take the computer out ill know more from the shop its at now in a couple hours he removed the chip and is testing it again
--------------------
96 Stang GT Convertible Looks Stock =)
Posts: 277 | From: Modesto | Registered: Dec 2002
| :
|
|
chosen1
¯
Member # 1906
|
posted
i had the same problem with a previous mustang. i would be sitting at a light and the rpm would go straight to 3 grand for no reason. it did it sporatically and was very aggrivating. i scanned at a bunch of different places and got no definative answer. i replaced (all upgrades mind you)...the tb, tps, iac, egr, mass air checked for vacuum leaks, etc. and they solved nothing, i replaced the computer, and it solved everything. i replaced that last when i should have changed that first but i guess hindsight is always 20/20.
--------------------
1967 Fastback. Should go 10's -but doesn't
1993 Cobra
2003 Suzuki SVS
1966 Coupe -For Sale
Posts: 2205 | Registered: Sep 2002
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
