This is topic where to buy gears? in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=002341
Posted by Mean2001GT (Member # 1750) on :
 
i heard that some places on-line have droped their price quite a bit, however i can't find one of those stores. does anyone have any sugestions on where to get 4.10 fms gears? thanks

-chris
 
Posted by 98sjcobra (Member # 1687) on :
 
rear end specialties in santa clara is pretty reasonable thats wear a lot of people get them
joe
 
Posted by gR40coupe (Member # 698) on :
 
www.summitracing.com
 
Posted by StoplightWarrior (Member # 211) on :
 
Check pms!
 
Posted by PseudoCobra (Member # 1689) on :
 
go to parts store at mustangweekly.com and check it out. I think I saw some for 140 the other day and that's the lowest price I've ever seen for gears. [patriot]
 
Posted by andyman_2k01 (Member # 1448) on :
 
mean2001gt what does your car run in the 1/4 mile with your current mods???
 
Posted by Mean2001GT (Member # 1750) on :
 
i hit a 13.82, but my timing adjuster was really off. i think i was running like 0 deg. initial timing. the reason why i think i was running 0 deg timing was because the key way of the stock pully and the bbk pulley were off, so i made a slot where i thought the key way should have been. as it turns out i was off by a fraction of an inch. but as it turns out, a fraction of an inch off in the center, is a little over 3/4 of an inch where it matters (where the timing is measured). ok ok ok, i'm a dumbass, but if anyone wants that timing adjuster, which is untouched, it's 100. i don't know what that is worth, but i think it's quite a bit of extra hp. we'll see soon though...

-chris
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com