|
Author
|
Topic: Idle too high
|
89lx
¯
Member # 1703
|
posted
 
 
Took my TB and EGR spacer off to clean them. Now the Idle is about 300 RPM high. Can't see/hear a vacuum leak. All bolts are tight. Tightened and regreased the "trash can" connectors on the back of the intake. Checked the connections and cleaned the IAB valve. Still the same.
What's up? ![[Confused]](confused.gif)
Posts: 116 | Registered: Aug 2002
| :
|
|
Stimson
_
Member # 51
|
posted
When ever you take off the TPS and/or throttle body off, you should reset your idle screw and TPS setting.
Posts: 2373 | Registered: Jun 2000
| :
|
|
GHOSTDOG
¯
Member # 522
|
posted
i had this problem also all i did was clean my mass air meter and disconect the battery for 5 minutes and it reset the throttle perfect
--------------------
hennessy lemon squeeze and green bud chillin in my stang with a mean mug
Posts: 320 | From: ANY LIQUOR STORE IN THE 510 | Registered: Oct 2001
| :
|
|
MR GO FAST
¯
Member # 2088
|
posted
HAD THAT PROBLEM ONCE. I USED AN IDLE AIR ADJUSTER WHICH IS MOUNTED BETWEEN THE THROTTLE BODY AND THE AIR BYPASS VALVE. YOU CAN BUY ONE FROM FORD.
--------------------
1986 Gt that is faster than FOSTANGS pinto
Posts: 3729 | From: ATWATER/SANJO/RWC | Registered: Nov 2002
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
