This is topic N2O Setup in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=001739
Posted by unfknblvbl89 (Member # 1522) on :
 
From a previous post I come to realize that I have a bad head gasket. Not a good thing, but even a better thing. Even though I can't have the engine I want built at the time, I am able to get this one rebuilt or for the same price of a rebuild I can buy a new short block. I am going to go with the new short block. I am going to get the DSS 306 pro bullet unless someone has a better suggestion.

I have a couple of questions for those of you that know about or run nitrous:

1. What cam and lifters should I use.
2. What heads should I go with and should I have them ported (what stage of porting should be done if ported).
3. What intake should I use. It should ported to match right?

Ultimately I want to run a dual stage NOS kit with around 150 a shot.

Any suggestions or ideas will be greatly appreciated.

Thanks
 
Posted by 88gt (Member # 579) on :
 
1. What are your goals for the car?

2. What is your budget for the car?
 
Posted by unfknblvbl89 (Member # 1522) on :
 
Goals...To try and run high 10's low 11's

Budget...I will taking out a loan, but not to exceed 10K
 
Posted by customN2O (Member # 914) on :
 
damn, 10gs, I would build you a rippen ass motor for that price. Even include a nitrous kit. By the way, why do you want a 2 stage kit if you are only going to be using 150hp? That is easily manageable for a mustang, both on the motor and some suspension upgrades. I can give you a single stage capable of a 150rwhp for a low low low low price! What is the cost of this shortblock you are looking at?
 
Posted by 88gt (Member # 579) on :
 
You should do some research on different combos and such it looks like. If you're buying a new shortblock, you might as well stroke it to something like a 347. If you're going to spend 10g's on a motor it better see a ten or 11 second time slip or you did something seriously wrong. Do you plan on manually shifting this car into the tens? If you really want to go that fast you might want to look into a built automatic race tranny and a little suspension work too.
 
Posted by unfknblvbl89 (Member # 1522) on :
 
I didn't have time to rephrase the second post.

I am pulling a loan not to exceed 10K, but not all is going to an engine. Although, a large sum of it will be. I have some minor body work to do, get some paint, and a little suspension work done.

The question about the tranny I am looking at a Lentech. So no I don't plan on shifting manually.

As for why I want to run the dual stage. Just sounds fun.

CumstomN2O- How big of a shot do you suggest then, lets say if all suspension and everything is done correctly.

I have thought about a 331 or 347. The short block I am looking at runs $1,999.99

I don't know I have to add up some numbers. If I can fit a 331 or 347 hell even for that a 393 SB in there I will.
 
Posted by sic91sleeper (Member # 779) on :
 
331 with a 150 shot. AFR heads and maybe either the edelbrock victor manifold or the TFS R manifold. Maybe look at a custom ground cam too.
 
Posted by customN2O (Member # 914) on :
 
At least a 200 shot. Then you will be a real MAN! 200 will be an easy 10 if you build the motor right!
 
Posted by shade-tree (Member # 298) on :
 
[customN20] [worship] [/customN20]
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com