This is topic Lowering Car? in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=001727
Posted by ELdiablo97 (Member # 1849) on :
 
Hi, I was wondering how to lower my car more? I have Eibach sportlines but its not low enough
 
Posted by AZTECLX (Member # 674) on :
 
You could go with Air bags or just cut a few coils…..but I would rather go with the air bags.
 
Posted by shade-tree (Member # 298) on :
 
I added a tremec 3550 , and a McCleod scattershield and it lowered the front end quite nicely [Big Grin] (stock springs/struts)
 
Posted by cobraman1994 (Member # 467) on :
 
i hear a 351 will lower the front too. try that [Wink]
 
Posted by AZTECLX (Member # 674) on :
 
Oh yeah..you could also add some hydros…then you can have it lifted, lower, side to side [worship] , up and down, 3 wheel motion [Eek!] , pancake… all at the flip of a switch… [dance]
 
Posted by Black2kGT (Member # 1629) on :
 
quote:
Originally posted by AZTECLX:
Oh yeah..you could also add some hydros…then you can have it lifted, lower, side to side [worship] , up and down, 3 wheel motion [Eek!] , pancake… all at the flip of a switch… [dance]
lol!!! Then you can have the little balls form you windsheild! [Razz] The gold wheels and little sparkly things on the mudflaps! [Eek!]

ROFLMAO!!!!! [Big Grin]
 
Posted by gR40coupe (Member # 698) on :
 
coilovers [patriot]
 
Posted by 00KNIGHTMARE (Member # 1010) on :
 
removing the isolaters lowered mine about 1/2" more in the front. i left the back ones in though. lookes better.
 
Posted by sic91sleeper (Member # 779) on :
 
quote:
Originally posted by 00KNIGHTMARE:
removing the isolaters lowered mine about 1/2" more in the front. i left the back ones in though. lookes better.
Your right Scott all you have to do is remove the isolators and it will be low enough for you.
 
Posted by lowerd96 (Member # 515) on :
 
coilover's rip! I had the griggs on my old car and with a few turns on the sleeve it was as low as I wanted it. Not to mention how it handled!
Its worth the xtra $$$.
 
Posted by ELdiablo97 (Member # 1849) on :
 
quote:
Originally posted by 00KNIGHTMARE:
removing the isolaters lowered mine about 1/2" more in the front. i left the back ones in though. lookes better.
does it make noise with them out?
 
Posted by javier (Member # 547) on :
 
I removed the isolaters from the front and covered the coils with duct tape and no noise. and it made my car look nice. lowered the front end for a total of 2 1/2 inches
 
Posted by v6mustanglover (Member # 545) on :
 
You used electrical tape!
 
Posted by on :
 

 




Fueled by Ford Mustang Owners
on CaliforniaFords.com