This is topic ATTN: 99gt-UJSTLST and youl luz in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=001635

---

Posted by TriplePLAY (Member # 948) on :
 
Guys, I don’t know if you both received my PM in regards to the HPM LCAs…just wanted to find out if you guys have the same problem as I had posted earlier:

I bought the HPM Megabite Jr. LCAs. I had installed these last week and have been annoyed by the freakin road noise and vibration since. The noise and vibration is extremely irritating...I think the noise originates from driveline transmitted through the LCAs and right into the chassis. it's noticeable when i roll from a stop sign...(mid-throttle to WOT)around 3.5k RPM is when the vibration is at its worse!! the thing is, this only happens when i gassin it. if i let off the throttle and just coast..i could hardly feel or hear anything. I have the setting on the top hole just what HPM had recommended for the street.
do you guys have the same prob as i do?
 

---

Posted by Milesblown03 (Member # 27) on :
 
I rode in Youl luz's car many times, and never noticed any vibration on accel... sure nothing was left loose? doesnt sound right...
 

---

Posted by 99gt-UJSTLST (Member # 584) on :
 

quote:

---

Originally posted by TriplePLAY:
Guys, I don’t know if you both received my PM in regards to the HPM LCAs…just wanted to find out if you guys have the same problem as I had posted earlier:

I bought the HPM Megabite Jr. LCAs. I had installed these last week and have been annoyed by the freakin road noise and vibration since. The noise and vibration is extremely irritating...I think the noise originates from driveline transmitted through the LCAs and right into the chassis. it's noticeable when i roll from a stop sign...(mid-throttle to WOT)around 3.5k RPM is when the vibration is at its worse!! the thing is, this only happens when i gassin it. if i let off the throttle and just coast..i could hardly feel or hear anything. I have the setting on the top hole just what HPM had recommended for the street.
do you guys have the same prob as i do?

---

I have noise in mine but its couse I have not fixed them you know I have them on wrong but I only get noise when I let off the gas when I am on the gas I its fine not vibration or any thing
hey do you have a alluminum drive shaft
 

---

Posted by TriplePLAY (Member # 948) on :
 
miles- this is not good
im sure everything is tight as can be- torque every bolt down to 95lbs./ft.

99- i still have the stock drive shaft.

what else could be wrong? i'll go in there and double check the bolts again.
 

---