T O P I C R E V I E W
|
JSHTROD
Member # 299
|
posted
I just installed the Steeda TA and Pullies.
TA is set on 14deg, and I get detonation in 3rd and 4th gears at WOT.
Whats everybody else running their TA's at on shitty 91octane fuel?
|
FAFCobra
Member # 1600
|
posted
You should be able to run 14...that's odd...but it is hot outside today...go to 13 and see what happens. Trial and error.
|
T-TopTerror
Member # 480
|
posted
Are you sure it's detonation??? Your motor has knock sensors and would automatically retard the timing if this was to occur, then you wouldn't even know it's occuring.
|
JSHTROD
Member # 299
|
posted
quote: Originally posted by T-TopTerror: Are you sure it's detonation??? Your motor has knock sensors and would automatically retard the timing if this was to occur, then you wouldn't even know it's occuring.
Sounds like a high-pitched rattle. Almost like a baby rattle. Soft in the top of 3rd, then much lounder once shifting to 4th. Sounds like its' coming from the rear driverside of the motor.
|
st5150
Member # 51
|
posted
It looks like 12 degrees will be ideal for your car. 2 degrees before the point of detonation is the general rule of thumb for most power.
|
blackcobra98
Member # 1078
|
posted
FYI-My Steeda T/A is set/has been set at 14* for the last 3 months or so-No knocking whatsoever. Maybe shitty ass Steeda sent you a defective T/A, like they sent me a defective alternator pulley 3x in a row and made me pay each time to ship it back.
|
JSHTROD
Member # 299
|
posted
Well... backed it down to 13.5 degs, and ran it hard in the heat of the day (100+ degree temps).
No detonation.
It's funny how .5 degree can make all that difference.
|
DementedGT
Member # 1463
|
posted
u should still back it down a lil more.. it could be silent.
|