|
Author
|
Topic: sticking throttle body
|
Silver92GT
¯
Member # 1264
|
posted
 
 
I just replaced my thrtl bdy and egr plate gaskets, i also cleaned the hell out of the thrly body. Now it sticks and the only way i can seem to fix it is to tap the gas before i start in first, that breaks its a little loose but are there and ways to stop the problem. Thanx ![[worship]](graemlins/worship.gif)
--------------------
Cold air intake, MSD 6A, Triax, Shorty equal length bbk headers, bbk offroad h-pipe, 3chamber flows
Posts: 20 | From: Castro Valley | Registered: May 2002
| :
|
|
93PONY
Mr. Valve Events
Member # 60
|
posted
Have you checked the mounting screws for the throtle blade? If they come loose, the blade will stick.
Is this a stock TB? If it's a BBK, they're notorious for this. They mount the throtle bushings in rubber which can distort & cause binding.
Also disconnect the cable & open the blade by hand, that should give you a better idea of were it's sticking.
--------------------
www.advancedenginedevelopment.com
SCT dealer
Dynotuning
(916)715-7569
Posts: 4266 | From: Fair Oaks, CA | Registered: Nov 2000
| :
|
|
|
Email this post to someone!
Printer friendly view of this Ford topic
