|
Author
|
Topic: Densecharger q's
|
White02GT
¯
Member # 611
|
posted
 
 
Well, I'm looking into putting a densecharger into my 02 GT. I was just curious how many people have them, and how hard they are to install. I am planning on doing the fender to throttle body system also. Thanks guys ![[patriot]](graemlins/patriot.gif)
--------------------
2002 Mustang GT 13.54 @ 102
"You can't out smart a smartass" Eminem
Posts: 1984 | From: Mountain View, Ca | Registered: Dec 2001
| :
|
|
01YellowCobra
¯
Member # 600
|
posted
quote:
Originally posted by 95Camaro:
Well, I'm looking into putting a densecharger into my 02 GT. I was just curious how many people have them, and how hard they are to install. I am planning on doing the fender to throttle body system also. Thanks guys
Not really tuff to install at all. The biggest pain in the ass was getting the rubber boot over the TB... the suggestion in the directions to use a little soap & water to help here is required knowledge. Also, the hose from the EGR valve(?) to the intake is crap - it will work but requires some force to get it on.
Pictured is the 100mm fender to throttle body system. Overall - I think it's well engineered. Should only take about 1 hour for the install. Have fun! ![[Big Grin]](biggrin.gif)
Posts: 150 | Registered: Dec 2001
| :
|
|
bunchmyfunky
CAFords Drag Racing Mod
Member # 360
|
posted
I have the filter to throttlebody setup. It was easy to install. There is one hose that you will have to cut to get it to fit. Also there is one part that will require two people to do. Someone will have to hold the filter unit from under the car and the person up top will have to reach in the hole in the fender and pull the filter unit thru the hole. It's a good cheap mod, you will notice the car pulls more from 3k to redline.
--------------------
01 GT 5spd
1.76 12.79@105.49
Posts: 2433 | From: Vacaville | Registered: Jul 2001
| :
|
|
|
|
1_Sick_Cobra
¯
Member # 718
|
posted
YellowSnake...is that the whole kit? How much did it cost you?
--------------------
WELL...ITS A COBRA...AND ITS FAST ;)
Posts: 90 | From: Livermore | Registered: Jan 2002
| :
|
|
01YellowCobra
¯
Member # 600
|
posted
quote:
Originally posted by 1_Sick_Cobra:
YellowSnake...is that the whole kit? How much did it cost you?
I kinda screwed up on the discription I gave in the first post  .
Everything from the filter to the throttle body was changed out, except for the stock MAF. Now that their site is working again - here's the poop.
System #6:Part# 4699100X
'99-01 4.6 Cobra 100mm Kit (fits without strut tower brace only)
Fender to throttle body system (100mm pipe all the way)
Includes 100mm Densecharger System with new CNC'd MAF Flanges
K&N # RU3480 6" Conical Air Filter
Price $150.00 + S/H
[ April 11, 2002, 12:07 AM: Message edited by: YellowSnake ]
Posts: 150 | Registered: Dec 2001
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
