Post A Reply
read DMs/my profile
login
|
join CAFords
|
search
|
faq
|
»
Northern California Ford Owners
»
Automotive
»
Tech Talk
»
WHAT IS THE BEST COMBO
» Post A Reply
Post A Reply
Login Name:
Password:
Message Icon:
Message:
HTML is not enabled.
UBB Code is enabled.
[QUOTE]Originally posted by Black94 5.0: [QB] [QUOTE]Originally posted by Luke87GT: [qb] [QUOTE]I will not get too technical with you about sway bars, shocks, struts, etc, because I don't remember what those guys had... You wanted a references... 11's w/ 150 shot with boltons: -Blk88gt (Ian McNiven) 11's with Strim + bolt-ons: -Shawn Donkin You could probably find their emails using the search feature on the corral and contact them. If not I can provide them for you. There are plenty of other guys that have accomplished 11.9x with stock longblocks w/ factory intake and 150 shots on the corral. If you are interested simply make a post in the drag racing forum with the title "Who has run 11.99 or faster with stock longblock and 150 shot?" I'm sure you'll get some responses. Another thing I must address... You referred to the low 13's not being average "for most people" with just simple bolt-ons. I agree. BUT average racers usually DON'T run 11's, lol. Take a look at Jim Langley or 91Pony that have both run 11's. Do you think they are average? Those two drivers have seen significant track duty. This post asked for ideas on how to get into the 11's. I simply stated what I would do to if I had the same goals as the original guy who started this thread. If the post went something like this: "I am a really average pathetic driver, and I don't go to the track very much, but I want to run 11's very easily, how do I do it?" Then I would recommend something very different. If you are interested in this I can put together a combo for you that will allow my grandma to run 11.99 or better on her first attempt at the track. It may cost a little over $5000, but if you want brainless 11's, here it goes... AFR 165's Long runner aftermarket intake off the shelf or custom cam 75mm TB 80mm MAF w/ 42lb injectors 255lph Vortech S-trim AOD with 3000 stall 4.10 gear Get it tuned. Black 94 5.0, have your grandma do a nice burnout, stage it, and floor it on green. Viola! For me, though, I'd rather run 11's with as little as possible along with some practice. That to me increases the fun factor and gives me something to work towards. Then once I asccomplish it and start adding parts, well, then my goals go up... Regards, Luke [/qb][/QUOTE]First of all, I bet you all of those 11 second stock long block combos were with masive weight reduction, slicks, skinnies, ice, no sway bars and a bunch of other BS... :rolleyes: Second, I feel its better to give good advise then just tell some one to go install slicks gears and a 150 shot and expect 11's... Third, you said it yourself, "You referred to the low 13's not being average "for most people" with just simple bolt-ons. I agree. BUT average racers usually DON'T run 11's"... Forth, you said references?...Thats plural, I only saw one... :confused: 11's w/ 150 shot with boltons: -Blk88gt (Ian McNiven) The other one was with an S-trim.... :p I like your Grandma combo...Try reading my first post, it's the third one down in this thread... ;) Good postin' Luke....I think 93gt has more learning to do than either you or I though....It must feel good to have $5000 to blow on a Mustang, my wife would KILL me!...lol ~Rob... [/QB][/QUOTE]
(
how?
)
Instant Emojis
Instant UBB Code
What is UBB Code?
Options
Disable smilies in this post.
*** Click here to review this topic. ***
Questions/Requests/Suggestions? email CAFords
Fueled by
Ford Mustang Owners
on CaliforniaFords.com