Post A Reply
read DMs/my profile
login
|
join CAFords
|
search
|
faq
|
»
Northern California Ford Owners
»
Automotive
»
Tech Talk
»
Adjusting idle on fox body 5.0
» Post A Reply
Post A Reply
Login Name:
Password:
Message Icon:
Message:
HTML is not enabled.
UBB Code is enabled.
[QUOTE]Originally posted by J's DDLY SNK: [QB] Turn the car on and let it warm up a few minutes (5). Remove the IAC and adjust the idle to 500-600 RPM. There is usually a gold/coper like screw on the Throttle Body (BBK) or a silver one on the Ford models. Place the IAC back on and the car will return to computer controlled idle. Turn the car off after a few minutes. Then with a voltmeter set the TPS at .99 -.97 volts.(or as close as you can get without going over.99) Turn the ignition on but dont start the car up, just keep it in the on position. Connect the positive lead of the meter to the grey w/ white strip. connect the negative lead of the meter to the grey w/ red strip. Once you reach the desired reading tighten down the TPS. [/QB][/QUOTE]
(
how?
)
Instant Emojis
Instant UBB Code
What is UBB Code?
Options
Disable smilies in this post.
*** Click here to review this topic. ***
Questions/Requests/Suggestions? email CAFords
Fueled by
Ford Mustang Owners
on CaliforniaFords.com