T O P I C R E V I E W
|
TheBrain
Member # 35
|
posted
Tonight, I took the JBA shorties and Bassani catted X-pipe off to install my Hooker Longtubes. I took the spark plugs out for clearance and noticed the #7 spark plug was black but the rest looked good. Upon closer inspection, the insulator is cracked The car never had a "dead" miss, but at times it would run MUCH better than others. I also noticed that the times it ran "not so good", I would have a vibration above 4000 rpm. Didn't get to run it tonight 'cause I have to tow it to the muffler shop tomorrow to have the custom 3" x-pipe made What do you think? did my car run a 12.5 @ 106 on 7 1/2 cylinders? I hope so !!!!
Brian
|
66 AC COBRA
Member # 904
|
posted
that would explain why the new combo is slower than the old one back to the track u go
|
TheBrain
Member # 35
|
posted
I hope that explains it, I put those plugs in when I installed the motor and haven't looked at them since. I bet I cracked it when I installed it 2 months ago If I get the exhaust done tomorrow and the weather gods are kind, I will try to hit Sac on Wednesday
Brian
|
shade-tree
Member # 298
|
posted
hope it's not P/V interference!
|
TheBrain
Member # 35
|
posted
quote: Originally posted by shade-tree: hope it's not P/V interference!
Nope, clayed the motor before I put in all together. I have close to .110 on the exhaust side and more than double that on the intake
|
Black94 5.0
Member # 655
|
posted
I'm always suprised how well a spark can jump, your plug still probably had some spark runnin through it....My car has run with a rough idle, with one of the plug wires totally dis-connected and it was still totally drivable!!...I think maybe you have 1mph with a new plug.....Hey, prove me wrong!!! ....Its gonna be hard to track prove if your plug was that bad if you put the 3" exhaust on...Oh well!..
Smoke a Chevy!
|
st5150
Member # 51
|
posted
I had the exact same thing happen to me, but it was the #3 cyl. It ran exactly how you describe. The #7 plug is a 5 minute swap... I guess we'll have to wait until this weekend to see if it fixes your MPH
|
KCmustangboy
Member # 1927
|
posted
quote: Originally posted by st5150: I had the exact same thing happen to me, but it was the #3 cyl. It ran exactly how you describe. The #7 plug is a 5 minute swap... I guess we'll have to wait until this weekend to see if it fixes your MPH
Maybe not he said he might go out on wednesday night I am going for sure
|
93PONY
Member # 60
|
posted
I'm gonna say no...that is probably not the cause. Sorry Bud.
I crack my sparkplugs all the time. (it's a bitch to install plugs on this car) I've run on the dyno & at the track on cracked plugs.....& I had no problems. I replace them when I find them....no difference in performance.
Here's a test. Pull off the intake spacers & run the car....no other mods. See what happens.
|
shade-tree
Member # 298
|
posted
weird. a buddy of mine cracked a spark plug and he ended up having to re-ring that cylinder.
|
TheBrain
Member # 35
|
posted
quote: Originally posted by 93PONY:
Here's a test. Pull off the intake spacers & run the car....no other mods. See what happens.
Leave it alone already I told you at the track that the reason I am running the spacer is due to the lack of clearance between my intake and valve cover for my nitrous solenoid. Here's a deal for you, You buy me an externally polished Edelbrock RPM intake AND NOS Bigshot plate for it, I will take off my GT-40. Until then the GT-40 stays
|
93PONY
Member # 60
|
posted
quote: Originally posted by TheBrain: quote: Originally posted by 93PONY:
Here's a test. Pull off the intake spacers & run the car....no other mods. See what happens.
Leave it alone already I told you at the track that the reason I am running the spacer is due to the lack of clearance between my intake and valve cover for my nitrous solenoid. Here's a deal for you, You buy me an externally polished Edelbrock RPM intake AND NOS Bigshot plate for it, I will take off my GT-40. Until then the GT-40 stays
Check your PM's..
|
jmcclesk
Member # 1355
|
posted
I hope its the plug. I lost a plug wire at the track one day and the et went down 3/10's I hope it is the plug [ May 06, 2003, 09:14 PM: Message edited by: jmcclesk ]
|
jmcclesk
Member # 1355
|
posted
Well have you run it yet????
|
TheBrain
Member # 35
|
posted
quote: Originally posted by jmcclesk: Well have you run it yet????
Check your PM's
|