T O P I C R E V I E W
|
Don
Member # 938
|
posted
Anyone install gears on the side? If so let me know.
|
JohnB
Member # 969
|
posted
I done a few sets . PM me if you're interested.
|
94gt
Member # 3060
|
posted
quote: Originally posted by JohnB: I done a few sets . PM me if you're interested.
He recently did mine, and I LOVE THEM!!!
|
Fostang
Member # 3752
|
posted
quote: Originally posted by SpdDevl: Definitely do it from someone on the boards. Do not go to Rearend Specialists...They did my gears back in early may and my pinion seal has broken twice already....it actually has started to leak for the THIRD time again... Screw them
Rear end specialties has definatly fallen apart in the last few months.
Give my buddy a call over at valley differentials in stockton 209-467-4301.
Family owned and operated so you know they'll do their best the first time unlike other shops that have a ton of people doing rear ends and some that don't know what they are doing.
|
Fostang
Member # 3752
|
posted
quote: Originally posted by SpdDevl: Definitely do it from someone on the boards. Do not go to Rearend Specialists...They did my gears back in early may and my pinion seal has broken twice already....it actually has started to leak for the THIRD time again... Screw them
I have a suspicion that the yoke is worn and is tearing the seal.
|
Black94 5.0
Member # 655
|
posted
quote: Originally posted by SpdDevl: Definitely do it from someone on the boards. Do not go to Rearend Specialists...They did my gears back in early may and my pinion seal has broken twice already....it actually has started to leak for the THIRD time again... Screw them
They installed 2 sets of gears on my 94, I had really bad whine both times...I took it somewhere else had they got it right the first time...
I have to say, I know tons of other people that have had good luck with them though...
|
JohnB
Member # 969
|
posted
Spd- They are installing the pinion flange dry, plain and simple. If you do not wet the face of the flange down prior to install, it won't roll the seal over the lip, pinching it and it WILL leak after extended driving and heating up. I would take it back if I were you, it's all on them... A driveshaft out of balance would have killed the housing bearing for the pinion first. Seals are flexible for a reason
|
gercolla1
Member # 3068
|
posted
quote: Originally posted by JohnB: Spd- They are installing the pinion flange dry, plain and simple. If you do not wet the face of the flange down prior to install, it won't roll the seal over the lip, pinching it and it WILL leak after extended driving and heating up. I would take it back if I were you, it's all on them... A driveshaft out of balance would have killed the housing bearing for the pinion first. Seals are flexible for a reason
Hey John, are you free during the weekdays for gear installs? I don't know what happened to this past weekend, but I guess I'll just give you a call.
|
specialty
Member # 2978
|
posted
i can install them for 200 if you have the gears and kit already 350 if i get the parts
|
Don
Member # 938
|
posted
I ended up going to Valley Diff here in Stockton, because it was the closest and he had good prices. All in all I would send anyone from the 209 area to him. He does good quality work, and really knows his shit. The only draw back was that I had to deal with Fostang the whole time.JK Nice to me you bro, and hope to see you next time we do some local street racing. I have a friend with a newer GT with a bottle that would be a good race for your Fox you had at the shop.
Anyway that is my report, and I can't wait till they are broke in, so I can do some testing at the track. Don
|
JohnB
Member # 969
|
posted
Glad to hear you got them done Don, congrats!
|
Don
Member # 938
|
posted
Thanks for your quote John, I would have went with you because you were the cheapest, but Valley was just so close and open that Sat. My rearend was making to much noise to continue to drive on it.
|
Fostang
Member # 3752
|
posted
Yup I'm an asshole.
We even finished that tahoe before closing.
|
Don
Member # 938
|
posted
That Tahoe was a good laugh.
|