T O P I C R E V I E W
|
9cobrasvt8
Member # 11078
|
posted
What do i need to convert front brakes on 96 gt to cobra brakes
|
5.0 LsX
Member # 10017
|
posted
calipers, caliper hardware, brackets, pads, rotors. hoses?
|
Sinister Mustang
Member # 13889
|
posted
quote: Originally posted by 9cobrasvt8: What do i need to convert front brakes on 96 gt to cobra brakes
Pretty straight forward as far as it goes.
You'll need:
PBR calipers (Cobra, Bullitt, Mach 1 ) 13" rotors Cobra spec brake lines Caliper brackets/hangers & hardware Brake pads
I hope this helps!
- Michael [ 2015-01-26, 11:44 AM: Message edited by: Sinister Mustang ]
|
70stang351w
Member # 9948
|
posted
Did my 96gt like the others said calipers,rotors,brackets, pads, lines. i added ss brake lines(front and Back) to mine and hawk blue pads; kept the GT Calipers in the rear with NEW ss Lines.
I actually replaces the rear gt calipers with new ones car had 200k figured might as well replace it
|
70stang351w
Member # 9948
|
posted
quote: Originally posted by 70stang351w: Did my 96gt like the others said calipers,rotors,brackets, pads, lines. i added ss brake lines(front and Back) to mine and hawk blue pads; kept the GT Calipers in the rear with NEW ss Lines.
I actually replaces the rear gt calipers with new ones car had 200k figured might as well replace it
You wont find a SSline kit for the back i had mine made at a place out in Pacheco/Concord area
|
9cobrasvt8
Member # 11078
|
posted
quote: Originally posted by 70stang351w: quote: Originally posted by 70stang351w: Did my 96gt like the others said calipers,rotors,brackets, pads, lines. i added ss brake lines(front and Back) to mine and hawk blue pads; kept the GT Calipers in the rear with NEW ss Lines.
I actually replaces the rear gt calipers with new ones car had 200k figured might as well replace it
You wont find a SSline kit for the back i had mine made at a place out in Pacheco/Concord area
How come they dont make them for the back?
|
70stang351w
Member # 9948
|
posted
not sure wasnt able to find anyone that produced them i Had MM ones on the front; cost me $90 to take my old rear lines to Guy in Pacheco/concord trying to find the name and number but duplicated them in SS looked just as good if not better quality than MM
|
9cobrasvt8
Member # 11078
|
posted
quote: Originally posted by 70stang351w: not sure wasnt able to find anyone that produced them i Had MM ones on the front; cost me $90 to take my old rear lines to Guy in Pacheco/concord trying to find the name and number but duplicated them in SS looked just as good if not better quality than MM
Well that blows lol
|
RAP66
Member # 3360
|
posted
I recently had a set of SS lines made by Classic Tube, when I ordered them I had them make the lines to fit 94/95 lines.
|