T O P I C R E V I E W
|
88chp
Member # 10712
|
posted
I need help choosing a cam for my set up I have Holley systemax aluminum heads the specs are 63cc Max lift .600 Flow 224 intake/ 164 exhaust at .500 lift 2.02 intake 1.6 exhaust 1.7 valve angle Runner volume 165cc intake / 71cc exhaust. And also I have Holley systemax manifold & 410 gears and i have 1.6 rollor rockers its going in a 302 block I want a cam for top end and rough sounds. Thanks cafords [ October 23, 2012, 02:25 PM: Message edited by: 88chp ]
|
NEIGHT
Member # 8741
|
posted
I was just like you choosing cam for the tough sounds but I finally came to conclusion that a custom cam is what I needed for best performance.
|
88chp
Member # 10712
|
posted
We're can I get a custom cam and wats the best company to make custom cams I heard comp cam does good job
|
NEIGHT
Member # 8741
|
posted
quote: Originally posted by 88chp: We're can I get a custom cam and wats the best company to make custom cams I heard comp cam does good job
I forget who everyone recommends but I got one from Comp Cams.
|
88chp
Member # 10712
|
posted
How much would that be.. Other people told me that the 35-351-8 it's is a good cam to
|
cali95gt
Member # 8940
|
posted
Everyone Reccomended HiTech.. I have one but have yet to personally put it to work.
|
4IDFOX
Member # 9921
|
posted
http://www.flowtechinduction.com/
http://www.bulletcams.com/
I have a bullet but can't go wrong with either. Whatever you get make sure it is ground on a billet core. A Comp cam that has a part no. That ends -8 is a SADI core. Not the best way to go.
|
turbo50
Member # 6700
|
posted
Easy easy easy choice. Renegade stage 1 from Hitech. Call Bryan at hitechmotorpsorts
|
88chp
Member # 10712
|
posted
Ok thanks u guys for helping me out also I was thinking trick flow stage 1,2,3 is that good cam to with my set up
|