T O P I C R E V I E W
|
Blue Oval
Member # 2548
|
posted
What do u think could make this combo better but similar and how much hp can i expect and ETs. 347 CHP stroker 10.5 compress w/60cc head TFS TW heads(box stock) 1.6 RRs X-303 Cam Edel. Perf. RPM 2 intake 30lb/hr inj 80mm MAF 70mm TB 255 intank pump FPR AFM NA power pipe pullies 1 5/8 equal lenght headers O/R X pipe
|
1SLOWLX
Member # 558
|
posted
I say about 330rwhp
|
88gt
Member # 579
|
posted
1 3/4" long tubes
|
Blue Oval
Member # 2548
|
posted
any other suggestions?
|
Rhombeus50
Member # 2973
|
posted
Get a C&L 76mm mass air, Comp XE274HR cam, & 1 3/4" headers. Shorties or LTs, either would be a better choice than the 1 5/8" equal lengths.
|
91sleeper
Member # 779
|
posted
Go with some LT's
|
Black94 5.0
Member # 655
|
posted
LT's and port the heads, why leave them box stock?..Otherwise some 185cc AFR's
|
91sleeper
Member # 779
|
posted
Out of the box, do the TFS TW or the AFR 185's flow better?
|
Rhombeus50
Member # 2973
|
posted
I'd definately go w/the AFR's over the TW's
|
87 Saleen
Member # 1549
|
posted
185's are work about a dime of horse power more then TW's.
TW's> AFR
|
Blue Oval
Member # 2548
|
posted
i would go AFR or port them but im on a really tight buget and already pushing it for the TWs.thanks for the suggestions.How much HP do u think the 185s are acually worth over the TWs?
|
AaronC
Member # 86
|
posted
The heads will be fine for your application. People are too port happy or too into flow #'s. The stock TFS head should support some good power. I like the combo exept I'd definitely use some BBK 1 3/4 longtubes and clean up the weld material and open the collector to 2.5". You'll want better valve springs than the stock TFS springs. I happen to have a set of Comp 914's with titanium retainers for sale. 150 lbs seat/385 lbs open.
Mike Camara made 353 RWHP and 371 RWTQ with a setup like this but with AFR 165 heads.
|
Blue Oval
Member # 2548
|
posted
How much for the springs? and what HP can i expect with the 1 3/4 headers?also i was curious if my intake choice is good.
|
98slowhoe
Member # 895
|
posted
LT's and I would go with the XE274 cam, seasoned 88 has that on his 342 and that thing runs great with that cam, he had 185's and made about 360hp
|
AaronC
Member # 86
|
posted
quote: Originally posted by Blue Oval: How much for the springs? and what HP can i expect with the 1 3/4 headers?also i was curious if my intake choice is good.
I'll sell the springs and titanium retainers for $100. The setup should make good power. The intake is very good and the 1 3/4 headers should make around 10+ RWHP more but more importantly make more avg. power. If funds are tight, start out with what you have and upgrade later. You might want to see if the RPM 2 has an opening for a 75mm throttle body. If it does match it accordingly unless you already have the 70. Everything else sounds good. Should make 350+ RWHP and make good torque and drive excellent.
|
Blue Oval
Member # 2548
|
posted
i dont have most of this stuff but will be buyin soon.thanks for help all let u know on the springs.How much lift can they handle?
|