T O P I C R E V I E W
|
66 InjectedCobra
Member # 819
|
posted
How much powa can 28 splines take?? Anyone broke those on a launch before?? Wonderng if I should step up t some 31's?? Any info is great
|
jayl
Member # 185
|
posted
youll be fine!! hehe.......
|
FasterDamnit
Member # 442
|
posted
Which car?
|
st5150
Member # 51
|
posted
I've seen them take 5K RPM clutch dumps, leaving on the bottle and I've also seen them break with 3500 RPM clutch dumps on the stock motor. Its basicly chance. Are you feeling lucky?
|
season'd 88
Member # 169
|
posted
i think if your questioning this at all it would be a wise upgrade.
|
98slowhoe
Member # 895
|
posted
put a rear-end girdle on it and call it good!
|
KCmustangboy
Member # 1927
|
posted
Ask my cousin Jon about it. he broke his twice and that was N/A with 302, I would go to 31s for sure, he has never had a problem sense he did.
|
TOPnotch
Member # 1340
|
posted
31 spline in your ass boyyyyyyy!!!!!!!!!!
|
BOUNTY HUNTER VERT
Member # 2754
|
posted
Save the $$$ and use the stock axles even if you break one you can get another one for 10 bucks at a junkyard and its a easy swap.
|
90GT
Member # 3
|
posted
Depends on the trans. too. Like st5150 said some guys go 10's, some break in the 13's.
|
shade-tree
Member # 298
|
posted
mine let go on a ~260 rwhp motor in a 3000# car running back-back-back 1.6x 60's on ET Streets.
|
Team SOLO
Member # 722
|
posted
quote: Originally posted by shade-tree: mine let go on a ~260 rwhp motor in a 3000# car running back-back-back 1.6x 60's on ET Streets.
mine held on just fine in a 2700 lb car at 6k rpm clutch dumping with the stick and 4k rpm transbrakes with the jug wired to the break... stockers pulling 1.4's
|
66 InjectedCobra
Member # 819
|
posted
Damn I thought the answer would be something like that.. I just hate to breat an axle during a launch or secong gear shift and crash my car into the wall at the track
especially after I just spent the last year learning how do make a car look like glass [AKA paint]
Does any one know where I could find some cheap 31 splines for a lincoln versa... 9"???
|
jph331
Member # 665
|
posted
Mine broke first launch out at Sac Raceway. Those were stock 28 spline, axle came out. I knew better, just in a rush at the time.
|
jayl
Member # 185
|
posted
quote: Originally posted by jph331: Mine broke first launch out at Sac Raceway. Those were stock 28 spline, axle came out. I knew better, just in a rush at the time.
i remember that night!! everyone in the stands stood up in shock!
|
Chosen1
Member # 1906
|
posted
I ran 28 spline axles through a mini-spool and drove the car on street all the time and took it to the track several times and they never broke. BUT when I get more money I will upgrade! .....
|