T O P I C R E V I E W
|
welch93lx
Member # 8748
|
posted
Will a banger t5 work in a v8..? Is it strong as a v8 one
|
93lx4cyl
Member # 10517
|
posted
Yes and no. The v8 t5 is stronger. Add slicks and you have a problem lol
|
rollininmy50
Member # 9067
|
posted
A 4cyl t5? Just isn't worth the break down, the one time you roast the tires, BAAM you'll be wishing it was a v8 tranny. If your gunna drive it like grandma then go ahead.
|
FivePTSlow
Member # 7682
|
posted
quote: Originally posted by 93lx4cyl: Yes and no. The v8 t5 is stronger. Add slicks and you have a problem lol
+1
I had a 4cyl T5 in my 89 5.0 with 3.73's. 1st gear was a waste of time like 0-5mph, and would spin tires everywhere. I raced a guy with a v8 T5 with 3.55's & I was shifting into third before he shifted to 2nd.
|
SIC9250
Member # 8216
|
posted
Gotta have stock gears to run this trans, with 273 gears in the rear the way a 4banger trans is geared it's almost like the car has 373s,I beat the shit out of my 4cyl trans in a fox coupe I had and it was fine,out lasted the motor actually..you must use a early 80s DIESEL Ford ranger pilot bearing to work with the 302..
|
SIC9250
Member # 8216
|
posted
quote: Originally posted by FivePTSlow: quote: Originally posted by 93lx4cyl: Yes and no. The v8 t5 is stronger. Add slicks and you have a problem lol
+1
I had a 4cyl T5 in my 89 5.0 with 3.73's. 1st gear was a waste of time like 0-5mph, and would spin tires everywhere. I raced a guy with a v8 T5 with 3.55's & I was shifting into third before he shifted to 2nd.
you sure you had 373s? Idk how that worked man I had stock gears and in 5th on the freeway @70mph I was easy 3k rpm..with 373s and the way a 4cyl trans is geared the car would max itself out in a few hundred yards lol
|
FivePTSlow
Member # 7682
|
posted
quote: Originally posted by SIC9250: quote: Originally posted by FivePTSlow: quote: Originally posted by 93lx4cyl: Yes and no. The v8 t5 is stronger. Add slicks and you have a problem lol
+1
I had a 4cyl T5 in my 89 5.0 with 3.73's. 1st gear was a waste of time like 0-5mph, and would spin tires everywhere. I raced a guy with a v8 T5 with 3.55's & I was shifting into third before he shifted to 2nd.
you sure you had 373s? Idk how that worked man I had stock gears and in 5th on the freeway @70mph I was easy 3k rpm..with 373s and the way a 4cyl trans is geared the car would max itself out in a few hundred yards lol
Yup, positive they were 3.73's. When I had the 3.73's installed at west coast differential I had no clue that I had a 4cyl T5 in my car. It was also my first 5.0, so I didn't know much about them yet. It would spin the tires 1st through 3rd all day with only mild bolt ons. Topped out around 120ish if I remember. Found that out when a Honda Prelude I was racing on the freeway in the middle of the night caught up to me after quite a ways since he had a little more top speed. It was absurd & actually was one of the reasons I crashed/rolled that car. Downshifted, got sideways, hit a curb, rolled the car. All cause the guy ahead of me smashed his brakes for no reason while going around a big curve on the freeway.
|