T O P I C R E V I E W
|
lxhatch5.0
Member # 6319
|
posted
I been having issues with my starter and I finally decided to pull It today. I bought It used of a member here at the same time i had a new flexplate installed, it popped right off and there was One wire connected and another not connected both are from the same harness. The thick One thats probably the 12+volt Was connected the other skinnier One was just hanging. Should both be on there? [ 2013-04-18, 03:37 PM: Message edited by: lxhatch5.0 ]
|
lxhatch5.0
Member # 6319
|
posted
|
5.SL0W
Member # 9987
|
posted
The smaller cable should be ur ground cable, find somewhere metal to connect it to, doesnt matter where as long it has a secure ground connection.
|
93lx4cyl
Member # 10517
|
posted
Make sure your solenoid (fender mounted) is good? Ford's go through those often lol.
|
lxhatch5.0
Member # 6319
|
posted
Thanks a lot 5.0slow Im going to give It a go after work hopefully It fixes the screetching sound It was as If the starter wasnt even engaging with out that ground hooked up
|
lxhatch5.0
Member # 6319
|
posted
quote: Originally posted by 93lx4cyl: Make sure your solenoid (fender mounted) is good? Ford's go through those often lol.
Wich One the black One?
|
lxhatch5.0
Member # 6319
|
posted
I connected the ground and slapped the starter back in there real tight, it cranks and starts right up.
But i still have this battery drain that i cant seem to track down. If i leave the battery posts connected it will drain my battery. Ill take a pic of the solenoid to see if theres anything there wrongly connected.
|