T O P I C R E V I E W
|
fredfifty
Member # 10320
|
posted
there are 2 bolts that attach the PS pump. one is a nut that fastens down and the other is a bolt that threads into the block..the bolt that threads into the block, does it sit flush against the bracket or is there a small gap (which i have)...ive tightened it down but it wont go anymore, leaving a small gap...
thanks
|
4iHatch
Member # 11298
|
posted
throw a washer in there. bolt might be too long if its not the original one. just put a washer in and problem solved
|
fredfifty
Member # 10320
|
posted
its a factory bolt though..? if anybody can check theirs and let me know, thanks...
|
sydewayzLX50
Member # 10217
|
posted
+1 add a washer
|
ALMOST STOCK
Member # 10085
|
posted
Just went out and checked my 89 and there shouldn't be a gap; it pulls up tight to the accessory bracket. [ November 09, 2011, 11:56 AM: Message edited by: ALMOST STOCK ]
|
Nifty50
Member # 9987
|
posted
Yea , if you're not using the accessorie bracket then there would be a gap
|
fredfifty
Member # 10320
|
posted
wierd. i have the acc bracket on, but ill just add washers, thanks!
|