T O P I C R E V I E W
|
03smknsvt
Member # 5514
|
posted
iam looking to get an 03 mach1 and procharging it. anybody know whats the most hp that engine can haddle?.thanxz for the help.
|
cobraracer46
Member # 1142
|
posted
A mach 1 can motor can probably handle about 400 with out problems, but even then, the stock powdered metal rods can fail at mid beam and punch a hole threw the engine block. I personally would not add a blower to my car unless I upgraded the connecting rods.
|
sharkattack
Member # 645
|
posted
6-8 lbs of boost on stock internals
|
03smknsvt
Member # 5514
|
posted
then why do i hear all this people saying that they call pull 500rwhp out of stock bottom mach1 are they just crazy or what the real ponteantial(sp) of the car?
|
88gt
Member # 579
|
posted
You can get a stock block'd Mach 1 to dyno at 500rwhp. How long will it last on the street like that if it's driven hard at all? Probably not too long.
|
losbadgts
Member # 4394
|
posted
remember mach 1's has a high compression engine so by putting a blower u are not going to be able to run not that much boost and even then it might take a shit, if i were u i will put a 100 shot of nitrous and a nice tune and call it a day, or put all the bolts ons and 4.30 gears and some slicks and u have your self a low 12 second or maybe high 11 seconds car
|
Jmir018
Member # 1414
|
posted
isn't there a mach 1 running mid 12s with just gears and exhaust at infineon? with a 100 shot.. you should be mid 11s.
|
mr mach ef
Member # 4025
|
posted
im sure you can get it to 500 . but by by motor. have hci strengthen the motor up n do it!
|
94gt
Member # 3060
|
posted
Check out the mach1 registry, there's several guys running 8+ w/ and w/o aftercoolers... That would be the best place to ask, since they have mach1's that are s/c'd
|
JohnB
Member # 969
|
posted
quote: Originally posted by 94gt: Check out the mach1 registry, there's several guys running 8+ w/ and w/o aftercoolers... That would be the best place to ask, since they have mach1's that are s/c'd
...and have blown up enough to tell you what WON'T work. HAHAHAHA
|
03smknsvt
Member # 5514
|
posted
<a href='http://www.smileycentral.com/?partner=ZSzeb008_ZNxmk762DOUS' target='_blank'><img src='http://smileys.smileycentral.com/cat/36/36_1_69.gif' alt='In The Pool' border=0></a>
|
03smknsvt
Member # 5514
|
posted
<a href='http://www.smileycentral.com/?partner=ZSzeb008_ZNxmk762DOUS' target='_blank'><img src='http://smileys.smileycentral.com/cat/3/3_8_13.gif' alt='Throw Computer' border=0></a>
|
03smknsvt
Member # 5514
|
posted
<a href='http://www.smileycentral.com/?partner=ZSzeb008_ZNxmk762DOUS' target='_blank'><img src='http://smileys.smileycentral.com/cat/16/16_1_20.gif' alt='Petting' border=0></a>
|
PWR HNGRY 302
Member # 6000
|
posted
[ February 02, 2006, 10:09 AM: Message edited by: PWR HNGRY 302 ]
|
SilverScab
Member # 6092
|
posted
|