Post A Reply
read DMs/my profile
login
|
join CAFords
|
search
|
faq
|
»
Northern California Ford Owners
»
Automotive
»
Tech Talk
»
Adjusting idle on fox body 5.0
» Post A Reply
Post A Reply
Login Name:
Password:
Message Icon:
Message:
HTML is not enabled.
UBB Code is enabled.
[QUOTE]Originally posted by 91PONY: [QB] Here's the procedure from Corral.net... Clear the EEC-IV's idle memory by disconnecting the battery for 20+ minutes. Disconnect the Idle air bypass solonoid Reconnect battery Start engine and set idle speed to desired RPM with stop screw on throttle body (900 rpm works great with E303 or larger cam) Turn off engine and reconnect the air bypass solenoid *Optional -- set TPS to 0.90 - 0.95 volts (Do not exceed 1.0 volts MAKE SURE!) Use a digital volt meter! Start engine and let it idle for 2 minutes with no accessories on. Turn off engine for two minutes Start engine again and run for 2 minutes with every accessory turned on. Turn engine off again. Your computer should have now re-learned the new idle settings. This procedure assumes that you have a clean IAB valve. If it is carboned up then you may need to remove it and clean it with carburetor cleaner. ~Heather :patriot: [/QB][/QUOTE]
(
how?
)
Instant Emojis
Instant UBB Code
What is UBB Code?
Options
Disable smilies in this post.
*** Click here to review this topic. ***
Questions/Requests/Suggestions? email CAFords
Fueled by
Ford Mustang Owners
on CaliforniaFords.com