T O P I C R E V I E W
|
66 InjectedCobra
Member # 819
|
posted
I need the shims to adjust the ford rockers today Does anyone have some laying around or know who sells them. Vic hubbard does not have them. THANKS
|
st5150
Member # 51
|
posted
speed merchant?
|
66 InjectedCobra
Member # 819
|
posted
quote: Originally posted by st5150: speed merchant?
Where are they at??? or #??
THANKS
|
66 InjectedCobra
Member # 819
|
posted
There closed
|
shade-tree
Member # 298
|
posted
I have some shims for pedestal mounts in my garage, maybe a dozen or so. You should be able to make some out of tin stock, I forget the thickness though... ? 0.05, 0.10, 0.15?
|
66 InjectedCobra
Member # 819
|
posted
quote: Originally posted by shade-tree: I have some shims for pedestal mounts in my garage, maybe a dozen or so. You should be able to make some out of tin stock, I forget the thickness though... ? 0.05, 0.10, 0.15?
I quess you adjusted yours? Did you find this to be a problem. My topic for valve train problem! The lifter is opening the valve and not letting it close all the way??
|
shade-tree
Member # 298
|
posted
doesn't close all the way? too tight back off bro. If you're desperate (and I had to do this) run a compression test on the cylinder you're working with after you are done with the rocker.
|