T O P I C R E V I E W
|
moeofit32
Member # 10393
|
posted
http://www.youtube.com/watch?v=3DbFCNcCjKE look at were the gasket and the head meets it leaks [ 2013-05-26, 03:39 PM: Message edited by: moeofit32 ]
|
Greasy
Member # 5258
|
posted
I click on the link and it says "Download Failed"
|
moeofit32
Member # 10393
|
posted
damnit let me try something else
|
MACK.GT
Member # 10461
|
posted
I.was able to.see clip. Based.on what i saw, id.say its The.gasket. Either way ,once you take it apart to inspect,youll need New head gaskets. But The reason why they leaked , my guess would be some warpage thats out Of spec. Did you measure those heads.with a straight edge. And feeler gauges? Some sort Of installation error may be The cause.id go back check.my steps, best Of luck....
|
moeofit32
Member # 10393
|
posted
i had the head checked and milled by a local shop....i uploaded a new video [ 2013-05-26, 03:50 PM: Message edited by: moeofit32 ]
|
MACK.GT
Member # 10461
|
posted
Thats Good, one less thing. Now on those studs, do they require any kind Of teflon tape Or other sealant like hylomar? K Im just trying to figure how they might leak From The studs.
|
moeofit32
Member # 10393
|
posted
i was told u should use some form of sealant and i believe it was used motor been together for a year and just started leaking while i was doing a k member on my stang....st8 out of nowhere
|
turbo50
Member # 6700
|
posted
Sleeze the stud out put sealant on it and stick it back in.
|
moeofit32
Member # 10393
|
posted
how many pounds of pressure on the stud when torqued back down [ 2013-05-26, 04:41 PM: Message edited by: moeofit32 ]
|
moeofit32
Member # 10393
|
posted
thanks guys i found the problem its actually running from my upper intake and dripping down
|
CobraCoupe
Member # 7233
|
posted
Just curious what intake gaskets did you use? Are they felpro 1250?
|