T O P I C R E V I E W
|
1sick65
Member # 3957
|
posted
does the spindle require anything extra to accomodate the cobra calipers?
|
ratfast
Member # 8720
|
posted
There is a bracket that spaces the caliper out to run the 13" rotors. Most remanufactured calipers for the Cobras come with it in the box. I used to have a couple sets, let me know if you need them.
|
MUSTTANGUY
Member # 2251
|
posted
All of the 13" Cobra/Mach1/Bullitt calipers will bolt right up to the 94/95 spindles.
Only the 99-04 11" GT/V6 aluminum dual piston PBR caliper requires some clearancing to the arch.
I have refurbished 94/95 spindles available if needed
|
1sick65
Member # 3957
|
posted
thanks guys, i have the spindles and am getting the calipers. are the bolts needed anything special?
|
MUSTTANGUY
Member # 2251
|
posted
Most of the mid-full size Fords use the same caliper bolts, Don't recall the size offhand. You will also need a balljoint spacer if installing on Fox control arms. I have machined ball joint spacers and caliper bolts available.
|
5.0 LsX
Member # 10017
|
posted
all of the caliper bolts are the same, i would recommend pressing in sn95 ball joints
|