T O P I C R E V I E W
|
project_stangs88
Member # 4599
|
posted
Would a complete front suspension and steering ...spindle,calipers, links,tie rods, idle arm ect. Bolt on to a 65 mustang... Any help would b appreciated
|
wilit
Member # 3367
|
posted
What? You're missing a part of your question. What type of complete front suspension are you looking to bolt up?
|
project_stangs88
Member # 4599
|
posted
I wana swap everything over from my 67 to my 65 .....just wana know if all the steering and front suspension parts will bolt rite up... The reason is cause the 68 has all new suspension and steering like idle arm, links,control arms...
|
project_stangs88
Member # 4599
|
posted
Stock complete front suspension with spindals and disk brakes
|
wilit
Member # 3367
|
posted
The spindles and calipers will swap over, and possibly the outer tie rod ends, but that's it. Everything else is different between the '65-'66 and '67-'68. In fact, I believe you need to use the '67 outer tie rod ends because they went to a larger diameter pin with a different taper than the '65-'66.
Here's a good thread about the spindle differences. http://forums.vintage-mustang.com/vintage-mustang-forum/574308-ford-brake-spindle-interchange.html
|
Stang66
Member # 10504
|
posted
why 67-68 brakes? wouldnt you rather have the dual piston calipers?
|
project_stangs88
Member # 4599
|
posted
Cause I came up on a crashed 67 all new suspension, all new steering
|