T O P I C R E V I E W
|
Curt
Member # 6254
|
posted
So im sure you all read the article about the SSI vs. the Cobra manifold, does anybody know if they ever did one like that that was Trick Flow vs. Cobra? Trying to decide between the two
|
two-gun kid
Member # 5891
|
posted
i know they did 2 sets of test of commonly used intake on a stock 302 then the following issue that used the same intakes on a stroker, let me see if i can find the issues.
|
Eagle347
Member # 6205
|
posted
I would not buy either. I have heard notning but bad things about the BBK, and the Cobra was a good intake in its time but now there are many others out that are better, and they do not cost much more. I would look into Trickflow and Edelbrock intakes.
|
89 FAKE SNAKE
Member # 4531
|
posted
trick flow
|
two-gun kid
Member # 5891
|
posted
quote: Originally posted by 89 FAKE SNAKE: trick flow
+1 even looks cooler with matching valve covers
|
NO MANRZ
Member # 566
|
posted
BBK put the story on their website http://www.brothersperformance.com/downloads/mmffSSI.pdf
|
92stangLX
Member # 3252
|
posted
It would be great if someone did an intake manifold shootout with *all* of the EFI Street intakes.
Has anyone seen any articles like this?
|
Eagle347
Member # 6205
|
posted
quote: Originally posted by 92stangLX: It would be great if someone did an intake manifold shootout with *all* of the EFI Street intakes.
Has anyone seen any articles like this?
5.0 Mag did one a while back. They tested almost every intake. They used a 347 on an engine dyno. The Edelbrock Performer RPM 2 had the best results. I dont know why they never test the Victor 5.0 intake though because it is better than the RPM 2.
|
Curt
Member # 6254
|
posted
Yeah I was leaning towards the TF since I plan on getting their heads, and the BBK looks too weird, I was just hoping it might be better
|