T O P I C R E V I E W
|
AR_Stang
Member # 10223
|
posted
I just picked up a 351w F4TE complete long block. I know ill need a 351 swap oil pan, power steering bracket, and a efi manifold. Now can i use my Fcam and springs with the stock 351 heads,pushrods? Any other parts i might need? I'm also going to swap over my turbo, how much psi can i safely run? It'll be a stock shortblock and heads for now. Thanks
|
915.0gt
Member # 9518
|
posted
Yes you can re-use the cam and springs, and I think you can use the pushrods too. But that f cam is gona be too small to be of real use with a 351. 302 parts make 302 power [ November 07, 2011, 05:50 PM: Message edited by: 915.0gt ]
|
351stang
Member # 7579
|
posted
i believe the push rods are longer for a 351 i got some stock ones you could have
|
AR_Stang
Member # 10223
|
posted
I'll give a try with the fcam see what it does. I'm planning of getting some heads soon, then maybe I'll try a custom cam. How much psi you guys think I should run?
351Stang- I'll try to make it out there Friday or Saturday night after work for the oil pan
|
|