T O P I C R E V I E W
|
SLOWSN95
Member # 8269
|
posted
I will be doing a h/c/i setup on my 94' gt. I am hoping to make around 310-320 rwhp. I've got a friend that has 24# injectors with a matching maf. My question is.. are the 24s sufficient enough to support the fuel I need? If so, would it still be safe to run the 24# with a 100 shot of nitrous (wet)? Or would I need to upgrade to 30s? Thanks.
-Nick
|
79 cobra
Member # 10137
|
posted
wat h/c/i are u going with that will make the difference
|
SLOWSN95
Member # 8269
|
posted
quote: Originally posted by 79 cobra: wat h/c/i are u going with that will make the difference
Edelbrock performer upper/lower, TFS1, and I'm currently looking at the edelbrock e-cnc heads with the 2.02 intake
|
87droptop50
Member # 7185
|
posted
You should be ok with 24s if you have them already. I'd just do 30s if so you have room to grow
|
SLOWSN95
Member # 8269
|
posted
Nvm.. I won't be using the e-cnc heads.. there was a typo online. Guess I'm looking at the E Street heads (2.02/1.90).
|
79 cobra
Member # 10137
|
posted
i wud step it upp 2 the 30lb fuel injectors that way u have room 2 grow and theres no chance 2 lean the motor out
|
SLOWSN95
Member # 8269
|
posted
I was leaning towards the 30# to be safe. Definitely do not want to lean it out like u just stated 79cobra. Don't wanna blow an engine over something that could have been avoided. Thanks for your help you guys [ June 01, 2011, 08:08 AM: Message edited by: SLOWSN95 ]
|
sydewayzLX50
Member # 10217
|
posted
With that hci 24s should be ok, if youre gonna spray it too use 30s
|
SLOWSN95
Member # 8269
|
posted
quote: Originally posted by sydewayzLX50: With that hci 24s should be ok, if youre gonna spray it too use 30s
Yes, I will be spraying. I will be going with 30# now. Thanks fellas!
|
79 cobra
Member # 10137
|
posted
i got some 30lb injectors for sale if u need
|