T O P I C R E V I E W
|
aj5.0916
Member # 7968
|
posted
i have a 5.0 85 with 5 lug disk rearend from a linkin mark 7 i had 275/40s on there and the rubbed when i hit bumps and freeway on ramps now i wanna put some 315s on there will fender rolling and spacers work oh yea the rim sise is 17s [ November 11, 2007, 03:42 PM: Message edited by: aj5.0916 ]
|
Blind
Member # 3052
|
posted
well where are the tires rubbing?
spacers move the wheels/tires out towards the outer fenders, if you're rubbing there now (probably) than it's only going to be worse.
|
aj5.0916
Member # 7968
|
posted
quote: Originally posted by Blind: well where are the tires rubbing?
spacers move the wheels/tires out towards the outer fenders, if you're rubbing there now (probably) than it's only going to be worse.
on the fender lip
|
89Rodknocker
Member # 2951
|
posted
I had the same problem the rear end is wider and pushing your wheels out. If you run the s197 wheels you should clear the 275's but im not sure about the 315's
|
Curt
Member # 6254
|
posted
roll the fenders, I used a hammer but i'm not much for finesse
|
aj5.0916
Member # 7968
|
posted
quote: Originally posted by Curt: roll the fenders, I used a hammer but i'm not much for finesse
sn95s dont really like those i have the bullitt rims
|
aj5.0916
Member # 7968
|
posted
quote: Originally posted by aj5.0916: quote: Originally posted by Curt: roll the fenders, I used a hammer but i'm not much for finesse
sn95s dont really like those i have the bullitt rims
opps meen s197s
|
Blind
Member # 3052
|
posted
quote: Originally posted by aj5.0916: quote: Originally posted by aj5.0916: quote: Originally posted by Curt: roll the fenders, I used a hammer but i'm not much for finesse
sn95s dont really like those i have the bullitt rims
opps meen s197s
ALL fords love the ford tool (BFH)
|
aj5.0916
Member # 7968
|
posted
quote: Originally posted by Blind: quote: Originally posted by aj5.0916: quote: Originally posted by aj5.0916: quote: Originally posted by Curt: roll the fenders, I used a hammer but i'm not much for finesse
sn95s dont really like those i have the bullitt rims
opps meen s197s
ALL fords love the ford tool (BFH)
huh dont understand that one
|
Blind
Member # 3052
|
posted
quote: Originally posted by aj5.0916: quote: Originally posted by Blind: quote: Originally posted by aj5.0916: quote: Originally posted by aj5.0916: quote: Originally posted by Curt: roll the fenders, I used a hammer but i'm not much for finesse
sn95s dont really like those i have the bullitt rims
opps meen s197s
ALL fords love the ford tool (BFH)
huh dont understand that one
BFH = big fucking hammer, aka The Ford Tool.
|
1994steeda
Member # 6127
|
posted
BFH LOL.... good one works for me....
|
aj5.0916
Member # 7968
|
posted
quote: Originally posted by 1994steeda: BFH LOL.... good one works for me....
oh i can dig
|