T O P I C R E V I E W
|
87#184saleen
Member # 6276
|
posted
i was wodering whats the most psi on a s trim and what kind of injectors should i use
|
AJBlackGT
Member # 3936
|
posted
Depends on the motor. You gotta calculate the blower rpm. I think the max rpm on an s-trim is 50k. But they can be overspun a little. If you are planning on spinning the blower that hard, you probably are going to need 60lb injectors.
|
SmokinLX
Member # 1684
|
posted
Stock 5.0 will show more restriction "or psi" than a HCI 5.0 with good flowing exhaust. A totally stock 5.0 with a pullied S trim would probably show around 18 PSI, but if You took the same pullied S trim and put it on a stroker motor with great HCI and free flowing exhaust You might be down around 10-12 psi. My 306 with HCI and free flowing exhaust has a S trim that's pullied to max recommended RPM and makes 13 pound's.
|
87#184saleen
Member # 6276
|
posted
THANKS
|