T O P I C R E V I E W
|
street_illegal_stang
Member # 1554
|
posted
alrighty, wondering if its possible to unbolt the four bolts connecting the trans to the bell housing ...will this distrub the throw out bearing or can i wedge somthing between the clutch fork to retain it? i got bbk longtubes on the car so i'm trying to get away with just unbolting the trans from the bell . will the throwout bearing fall when i pull the t-5 back???
|
JBeezy53
Member # 3960
|
posted
When I changed my trans that waht I did. Just unbolted the four bolts and took it out. Then slid the other on in and made sure the shaft went through the T.B. and wiggled it in. No problem!
|
JohnB
Member # 969
|
posted
Leave the clutch cable hooked up; the throw-out bearing isn't going anywhere.
|
red GT black rallyes
Member # 4495
|
posted
true as johnb said it wont move just make sure you get it lined up right on re-install , wiggle and push and it will go in
|