T O P I C R E V I E W
|
white1990stang
Member # 2307
|
posted
I just put a compucar nitrous system in my car. 150 jets. I have a tfs street heat intake, 70mm tb, f-cam 3:73's, pullys. What should i set my timing at when squeezing? What plugs do you guys reccomend and what gap? Also any other little tips would be very helpful.thanx.
|
91sleeper
Member # 779
|
posted
Get autolite 24's gapped at like .034 and retard the timing to about 8 degrees. Work from there.
|
white1990stang
Member # 2307
|
posted
its also popping out my exhaust when i squeeze. sometimes it backfires through the intake to.
|
shade-tree
Member # 298
|
posted
quote: Originally posted by white1990stang: its also popping out my exhaust when i squeeze. sometimes it backfires through the intake to.
sounds like you've got it all squared away then!
are your plugs getting fragged? like missing bits of the electrode?
|
66 AC COBRA
Member # 904
|
posted
i gotta question for u then 91sleeper, mikes drop top had autolite24's when i got it, i was gonna put 24's back in but they wouldnt thread into my cylinderheads on my other motor that i am putting in the car, any idea why 24's wont fit into the heads, supposedly they are stock 91gt heads, the whole engine was out of a basicalyy stock 91 gt, the heads were taken off to get ported but i am not sure why the plugs dont fit
anyone with any help, the plugs fit into stock 88gt heads but not stock 91gt heads, i though E7's were E7's
|
white1990stang
Member # 2307
|
posted
66 ac cobra your a little off topic. but does anyone have a jet card for the compucar system. i have one but i just want to make sure there right thanx.
|
66 AC COBRA
Member # 904
|
posted
sorry man, not trying to hyjack ur post, i have already started my own post and it started so much drama that it got moved by swason, no hard feelings, and go with the 24's, i have heard they really work
|
91 5.0
Member # 1527
|
posted
Should have gotten a blower Anthony. JK, I wish I could help you with this, but I dont know shit about nitrous.
|
white1990stang
Member # 2307
|
posted
anybody have any ideas?
|
91sleeper
Member # 779
|
posted
quote: Originally posted by white1990stang: its also popping out my exhaust when i squeeze. sometimes it backfires through the intake to.
Sounds like you either dont have enough fuel which is leaning out or your plugs are just completley gapped wrong. Does it only back fire when you are squeezing? How do the plugs look?
|
91sleeper
Member # 779
|
posted
quote: Originally posted by 66 AC COBRA: i gotta question for u then 91sleeper, mikes drop top had autolite24's when i got it, i was gonna put 24's back in but they wouldnt thread into my cylinderheads on my other motor that i am putting in the car, any idea why 24's wont fit into the heads, supposedly they are stock 91gt heads, the whole engine was out of a basicalyy stock 91 gt, the heads were taken off to get ported but i am not sure why the plugs dont fit
anyone with any help, the plugs fit into stock 88gt heads but not stock 91gt heads, i though E7's were E7's
There are two differnt types you can get. There are plugs that are only threaded halfway and plugs that are threaded all the way. Which ones did you get? Make sure you did not cross thread any of them while trying to install them. If I were you I would also try an chase the threads and if that doesnt work re tap them.
|
87mustang
Member # 2496
|
posted
i have a compucar set and i beleave my timeing is around 15, it was what i had it at before the set and i have had no problems! why dont u use a lesser shot to take the promblems away?
|