T O P I C R E V I E W
|
510Notch
Member # 9353
|
posted
trying to install a 3g alt but i need to figure out which terminal is the "I" terminal?
(car is kind of bare and original regulator is gone, the pic is for reference/identification purposes...I dont have a regulator around with the terminal markings)
|
v-town coupe
Member # 2771
|
posted
if your going 3G you can toss that. if you look all the wires went back to the solenoid. when I went 3g I traced all the wires back and took the whole harness out and havent had any issues since.
|
v-town coupe
Member # 2771
|
posted
my car is a 67 btw.
|
510Notch
Member # 9353
|
posted
quote: Originally posted by v-town coupe: if your going 3G you can toss that. if you look all the wires went back to the solenoid. when I went 3g I traced all the wires back and took the whole harness out and havent had any issues since.
I was looking at a diagram and it says that the exciter wire from the 3g alternator plugs into the original regulator connector ("I" terminal).
where did you hook your exciter wire upto?
|
wilit
Member # 3367
|
posted
Look on the top side of the plug, they should be labeled. I should be on the far left.
|
slocobra
Member # 6311
|
posted
Also the ignition terminal on the starter solenoid should work for you too!
|