T O P I C R E V I E W
|
triple b
Member # 8763
|
posted
hey guys i bought some ported edelbrock performers a long time ago from a guy in rocklin. He had the heads ported ehxust and intake they have 2.02 valves and also had the surface milled they were 60cc chamber. Can anyone here shed some light on flow numbers and what the chambers size is now? looking to use these for a 351 stroker build or a 331/347
|
v-town coupe
Member # 2771
|
posted
going to have to talk to the guy who had them ported or get them flow tested yourself. HYFLODS is a member here who has a flow bench if I remember correctly.
|
v-town coupe
Member # 2771
|
posted
this chart is kind of Janky because there is not much info and it doesnt say where the numbers came from: http://www.w8ji.com/small_block_ford_heads.htm
|
triple b
Member # 8763
|
posted
thx guess they arent what i was expecting i cant see more than 250 flow after porting
|
JBeezy53
Member # 3960
|
posted
Depends on how well they flow. Fox Lake has a nice CNC program for Performer heads. Their CNC program gets them to flow 300 @ .600". They would make a very stout street motor in a stroked 351 but would probably fall off around 5500 rpms or so. Heres Fox Lake's link, we have no idea how well yours flow though.
http://www.foxlakeracing.com/edelbrock.php
|
triple b
Member # 8763
|
posted
thx i goggled cnc performer didnt come up im look at that
|