T O P I C R E V I E W
|
Cstang50
Member # 4925
|
posted
I just changed my lower intake gaskets and now the car idles like shit I keep coming up with code 66-96 dose any one know what could cause them
Thanks casey
|
BlueOvalRacing
Member # 1531
|
posted
check the wiring to the mass air meter
|
Cstang50
Member # 4925
|
posted
I did and everything looks fine
|
BlueOvalRacing
Member # 1531
|
posted
and the hoses are installed correctly? no gaps/leaks anywhere? check the pins on the maf to see if any were bent over also
|
Cstang50
Member # 4925
|
posted
ya i went over everything three times i will check again to make .sure i will look for bent pins too [ July 29, 2006, 11:44 PM: Message edited by: Cstang50 ]
|
92stangLX
Member # 3252
|
posted
Code 66 is MAF or VAF circuit below min voltage code 96 is High speed fule pump relay circuit open; Fuel pump secondary circuit failure.
I would double check your vaccum lines to make sure they are all connected and weren't damaged when you pulled the inake off.
|
Cstang50
Member # 4925
|
posted
i found out the problem with code 66 and 96 but now I’m trying to find out why code 31 keeps coming up I know it is the EPS and I changed it but the code came back after I drove it around the block. What can I use to clean the connection ? thanks Casey [ July 31, 2006, 12:03 AM: Message edited by: Cstang50 ]
|