T O P I C R E V I E W
|
WayFastYTee
Member # 6116
|
posted
what year explorers had the gt-40 intake and heads on them?.and will they bolt up to my stock 302 with NO problems at all?thanks [ February 17, 2006, 06:34 AM: Message edited by: WayFastYTee ]
|
Dag302
Member # 4682
|
posted
Will not bolt up to a stock 302 lower. It has to be a Cobra or GT-40 lower. Even then you will have to plug the egr port on the lower because the explorer upper does not have the runner in the manifold.
|
NO MANRZ
Member # 566
|
posted
I think he meant to his stock 302 bottem end, which they will bolt up to just fine. The stock valve springs are weak and the P heads don't work with all headers.
|
Dag302
Member # 4682
|
posted
my bad, it was late!!!!
|
NO MANRZ
Member # 566
|
posted
Not your fault. The original post exhibited poor grammar and sentence structure
|
1quik69
Member # 5481
|
posted
1996 & early 97 had the GT40 heads. Mid 97 on had the GT40p heads which take a special header if you use them. The early manifold will have the suffix BA on the numer on the front of the manifold.
|